The document compares the overlap of Sai Deepa's 8 1/2" bearing and features in three different lug forgings from Cenerg. For the 8 1/2" lug, around 24mm needs removing from the shirttail and the nozzle boss will be machined. For the 8 5/8" lug, there is no material on the pin face or neck and around 7mm must be removed from the shirttail. For the 9" lug, there is less material on the pin face and neck, around 15mm must be removed from the shirttail, and gaps and positions can be adjusted.
The document compares the overlap of Sai Deepa's 8 1/2" bearing and features in three different lug forgings from Cenerg. For the 8 1/2" lug, around 24mm needs removing from the shirttail and the nozzle boss will be machined. For the 8 5/8" lug, there is no material on the pin face or neck and around 7mm must be removed from the shirttail. For the 9" lug, there is less material on the pin face and neck, around 15mm must be removed from the shirttail, and gaps and positions can be adjusted.
The document compares the overlap of Sai Deepa's 8 1/2" bearing and features in three different lug forgings from Cenerg. For the 8 1/2" lug, around 24mm needs removing from the shirttail and the nozzle boss will be machined. For the 8 5/8" lug, there is no material on the pin face or neck and around 7mm must be removed from the shirttail. For the 9" lug, there is less material on the pin face and neck, around 15mm must be removed from the shirttail, and gaps and positions can be adjusted.
This is the ovrelap of our Sai deepa's 8 1/2” Bearing and other features
in 8 1/2” JF lug forging developed recently by Cenerg.
-Need to remove around 24mm on the shirttail. Due to this the nozzle boss also will get machined. -Otherthan that the remaining gaps, positions are ok. This is the ovrelap of our Sai deepa's 8 1/2” Bearing and other features in 8 5/8” JF lug forging which is obsolete in Cenerg. -No material on Pin face and Neck portion. -Need to remove around 7mm on the shirttail. Otherthan that the remaining gaps, positions can be ok. This is the ovrelap of our Sai deepa's 8 1/2” Bearing and other features in 9” JF lug forging, developed by Cenerg, which we already using. -Less material on Pin face and Neck portion. (Option:: Material can be added in Neck & pin face portion with weld material.) -Need to remove around 15mm on the shirttail. Otherthan that the remaining gaps, positions can be adjusted.