This document discusses the design of a circular microstrip patch antenna array. It describes a radiating circular patch on a dielectric substrate above a ground plane, and how an array of such patches connected by feedlines increases overall gain and cancels interference by combining radiation from each element. It then outlines the simulation design of a two-element circular patch array, specifying the calculated patch radius, feedline dimensions, dielectric height and material properties used.
This document discusses the design of a circular microstrip patch antenna array. It describes a radiating circular patch on a dielectric substrate above a ground plane, and how an array of such patches connected by feedlines increases overall gain and cancels interference by combining radiation from each element. It then outlines the simulation design of a two-element circular patch array, specifying the calculated patch radius, feedline dimensions, dielectric height and material properties used.
This document discusses the design of a circular microstrip patch antenna array. It describes a radiating circular patch on a dielectric substrate above a ground plane, and how an array of such patches connected by feedlines increases overall gain and cancels interference by combining radiation from each element. It then outlines the simulation design of a two-element circular patch array, specifying the calculated patch radius, feedline dimensions, dielectric height and material properties used.
-a radiating patch(circular shape) on top of dielectric constant
-ground plane beneath it. -dielectric constant must be lower for better efficiency Array Antenna: -array antenna is used for maximum radiation by connecting feedlines -radiation from each element adds up to give max radiation -array increases overall gain and cancels out interference Our Simulation Design: - Two circular shaped patch connected in array -radius(a) of the patch is calculated as given -width and length of the feedlines are calculated using microstrip patch calculator Here, h=Dielectric Height=1.6mm E=dielectric constant =4.4 Material of dielectric =Epoxy FR CIRCULAR PATCH ANTENNA DESIGN SIMULATED RESULT FOR S PARAMETER SIMULATED RESULT FOR RADIATION PATTERN