The document provides instructions for removing and installing the Upper Transport Front (UTF) module on an ECRM unit. It specifies to use Section 4.5 of the ECRM Unit Replacement Manual as a guide. The instructions state to remove the module following the appropriate procedure, install it following the respective procedure, and follow all corresponding Diagnostic Tests (DT) and Adjustments (AD) procedures. It then lists the applicable DT and AD procedure numbers.
The document provides instructions for removing and installing the Upper Transport Front (UTF) module on an ECRM unit. It specifies to use Section 4.5 of the ECRM Unit Replacement Manual as a guide. The instructions state to remove the module following the appropriate procedure, install it following the respective procedure, and follow all corresponding Diagnostic Tests (DT) and Adjustments (AD) procedures. It then lists the applicable DT and AD procedure numbers.
The document provides instructions for removing and installing the Upper Transport Front (UTF) module on an ECRM unit. It specifies to use Section 4.5 of the ECRM Unit Replacement Manual as a guide. The instructions state to remove the module following the appropriate procedure, install it following the respective procedure, and follow all corresponding Diagnostic Tests (DT) and Adjustments (AD) procedures. It then lists the applicable DT and AD procedure numbers.
AD004-1 Gate (G002) position AD004-2 Solenoid (G002) position AD007 Solenoid (G004) stroke AD008-1 Gate (G004) position AD008-2 Solenoid (G004) position AD010 Timing belt tension (upper transport front) AD019 Gear backlash (upper transport front belt) Fin