Professional Documents
Culture Documents
Huawei RTN Microwave DCN Solutions: Transmission Network Marketing Support Department
Huawei RTN Microwave DCN Solutions: Transmission Network Marketing Support Department
How does the NMS manage the equipment and how does one
perform end-to-end DCN planning?
60 NEs
NMS
Gateway NE
Extended
ECC
•The inband DCN (using IP protocol) is recommended for the OptiX RTN 900 V100R001, and the HWECC protocol is
recommended for other versions.
•When DCCs are unavailable, connect NEs through NM cascading ports to achieve transmission of network
management information on extended ECCs.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6
DCN Planning When Huawei Radio Equipment
Forms a Network with Third-Party Equipment
Analyze Learn about the type of the third-party equipment The traversed network can
the network. and the type of Huawei radio equipment. provide pass-through channels.
RS-232 /G.703
FE channels E1 channels Other channels No channel
19.2/9.6 kbit/s channels
NM information is directly Use the FE-to-E1 Use the FE-to-RS232/G703 Use shared DCN channels or
transmitted through FE services. protocol converter. protocol converter. submit an OR workflow to apply for Whether do both Huawei
the development of a new protocol converter. radio equipment and
third-party equipment
support the same
DCN protocol?
No solution is available.
Communicate with the
customer for provision of channels. Y
Give priority to protocol converter solutions of Huawei over DCN protocols (IP protocol or OSI protocol).
RTN
Internal DCN
Non-gateway NE
•The preceding solutions are provided based on the combination of a DCN protocol (IP protocol, OSI protocol, and HWECC protocol) and transmission channels (DCCs, service
channels and in_band DCC).
•In the case of a network comprising only Huawei equipment, the HWECC solution is preferred. In the case of a network comprising Huawei equipment and third-party equipment,
the protocol converter solution is preferred and prepare quotations for protocol converters in advance.
DCC
transparent DCCs
N N Y Y N Y
transmission
HWECC Ethernet
Extended ECC Y Y Y Y N Y
HWECC
N N N N N Y
Inband DCN Service channels
IP protocol
N N N N Y Y
DCC transparent Not involved Wayside E1
transmission through
the external clock N N Y Y N Y
interface
Protocol converter Not involved Auxiliary
solution services or Y Y Y Y Y Y
service channels
•For information on whether a board supports a specific solution, see the DCN White Paper or Feature Description.
Mutual conversion between 1xFE Mutual conversion between Mutual conversion between 1xFE and
and 1xRS232 1xFE and 1xE1 Mutual conversion between
1xQ703
1xFE+1xE1 and 1xE1
FE RS232 E1 FE
FE FE G703
FE E1
FE
FE Note :
E1 1. E1_Converter can not interconnect
E1 with E1_C_Converter
E1 2. E1_MUX_Converter with different
…… BOM can not interconnect
E1_C_Converter
E1_MUX_Converter
Maximal 8 E1
E1 Channel E1 Channel
E1 Channel E1 Channel
Bandwidth limit
In the case of different DCN channel bandwidths,
the maximum number of non-gateway NEs that
a gateway NE can manage is as follows:
RTN 605
RTN 950
A network may comprise many types of equipment such as OptiX RTN 605/620/910/950, OptiX OSN/PTN equipment,
and third-party equipment.
A network may involve multiple networking topologies such as point-to-point, chain, star, ring, and supplementary
network to an optical network.
NM information about Huawei equipment passes through a third-party network or NM information about third-party equipment
passes through a Huawei RTN network.
RTN 605
RTN 950
Multiple versions:
E1/STM-1
Multiple types Optical+radio
of equipment: N+ ring FE/GE
0/ OSN/PTN
RTN, OSN, PTN N +1 BSC/RNC/aGW
RTN
Multiple topologies:
Point-to-point,
chain, star, ring, …
DCN solution:
• In most scenarios, the HWECC protocol stack is preferred when a network comprises only
Huawei radio equipment.
Multiple topologies:
Point-to-point,
chain, star, ring, …
Inband DCN
DCN solution:
• Adopt the inband DCN solution ( using IP protocol ) for an OptiX RTN 900 network that
comprises the OptiX RTN 900 V100R001.
Multiple versions:
Optical+radio E1/STM-1
Multiple types
of equipment: ring FE/GE
N+
0/ OSN/PTN
RTN, OSN, PTN N +1 BSC/RNC/aGW
RTN
Multiple topologies:
Point-to-point,
chain, star, ring, …
Transparent
transmission solution
DCN solution:
• Adopt the transparent transmission solution for an OptiX RTN 600/900 network that comprises
the OptiX RTN 900 V100R001.
Multiple versions:
E1/STM-1
Multiple types Optical+radio
of equipment: N+ ring FE/GE
0/ OSN/PTN
RTN, OSN, PTN N +1 BSC/RNC/aGW
RTN
Multiple topologies:
Point-to-point, Network
chain, star, ring, … cable
Extended ECC
DCN solution:
• When no service interfaces are available between two NEs, use extended ECCs to form an
internal DCN.
RTN RTN
RTN Protocol
converter
Router
RTN RTN
1 2 3 RTN Protocol
converter
Inband DCN or FE transparent One FE port is occupied and no extra device
transmission
is required. Router
RTN RTN
Protocol
converter
Router
RTN
Solution
Transparent Transmission Channel
Auxiliary DCN Device Remarks
Category Serial No. Provided by Third-Party Equipment
The service bandwidth of 2 Mbit/s (one E1) is required and therefore third-party
1 E1_Converter
equipment needs to provide one E1 port.
A minimum service bandwidth of 64 kbit/s is required and therefore third-party
2 E1 service channels E1_MUX_Converter
equipment needs to provide one E1 port.
Protocol converter This converter is applicable to point-to-multipoint scenarios and requires FE
3 E1_C_Converter
pass-through.
Third-party equipment needs to provide one G.703-compliant 64 kbit/s
4 G.703-compliant port G703_Conveter
codirectional data port.
5 RS-232 data port RS232_Converter Third-party equipment needs to provide one RS-232 data port.
The entire third-party network must adopt the IP over DCC protocol. In addition,
DCN channels by using the IP over DCC
6 None routes need to be configured manually (this work is complicated) and data
protocol
bandwidth needs to be calculated in advance.
Sharing DCN channels
The entire third-party network must adopt the OSI over DCC protocol. In
DCN channels by using the OSI over
7 None addition, routes need to be configured manually (this work is complicated) and
DCC protocol
data bandwidth needs to be calculated in advance.
Router (required when NM
Ethernet pass-through 8 FE service channels information passes Routers are used for data transfer between network segments.
through an IP network) Page 31
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
DCC transparent transmission The E1 provided by the external clock interface carries DCN information (the
Passing
Passing through
through Passing
Passing through
through DCN
DCN solutions
solutions to
to
third-party
third-party equipment
equipment Huawei
Huawei radio
radio equipment
equipment typical
typical scenarios
scenarios
Third-party network
RTN RTN
RTN RTN
Solution
Transparent Transmission Channel Auxiliary DCN
Remarks
Category Serial No. Provided by Huawei Equipment Device
The service bandwidth of 2 Mbit/s (one E1) is required and therefore Huawei radio
1 E1_Converter
equipment needs to provide one E1 port.
A minimum service bandwidth of 64 kbit/s is required and therefore Huawei radio
2 E1 service channels E1_MUX_Converter
equipment needs to provide one E1 port.
Protocol converter This converter is applicable to point-to-multipoint scenarios and is generally used
3 E1_C_Converter
with the preceding two protocol converters.
Huawei radio equipment needs to provide one G.703-compliant 64 kbit/s
4 G.703-compliant port G703_Converter
codirectional data port.
5 RS-232 data port RS232_Converter Huawei radio equipment needs to provide one RS-232 19.2 kbit/s data port.
Huawei equipment and third-party equipment need to support the IP protocol and
6 IP over DCC None interconnect with each other through management ports. In addition, routes need
to be configured manually.
Sharing DCN channels
Huawei equipment and third-party equipment need to support the OSI protocol and
7 OSI over DCC None interconnect with each other through management ports. In addition, routes need
to be configured manually.
Huawei equipment needs to provide one FE port. In addition, radio service
Ethernet pass-through 8 FE service channels Router (optional) channels of Huawei equipment are occupied and the channel bandwidth is
determined by the DCN information of third-party equipment.
NMS
LAN switch E1_Converter
E1/64k/RS232
E1/64k/RS232
etc.
etc.
E1_Converter
E1/64k/RS232
NM E1/64k/RS232
etc. E1_Converter
center E1_Converter etc.
E1/64K/RS232 etc
ETH
NMS
E1_MUX_Converter
E1 network
E1 network
E1_C_Converter
NM center
E1/64k/RS232 E1_Converter
E1/64k/RS232
E1/64K/RS232 etc
ETH
NMS
E1 network
E1 network
E1_MUX_Converter E1_MUX_Converter
E1 network
E1 network E1 network
E1 network E1_MUX_Converter
LAN switch
E1_C_Converter
NM center
E1 network E1_MUX_Converter
NMS E1 network
E1 (nx64
kbit/s) E1 network
E1 network
E1 network E1 (nx64 E1_MUX_Converter
E1 network
E1 E1 (nx64 kbit/s)
E1_C-
kbit/s) Converter
E1_MUX_Converter E1(nx64
LAN switch kbit/s) E1 network
E1 network
E1_C_Converter
NM center
NMS NM center
IP network
IP network Router
LAN switch
Router
IP network
IP network Router
NMS E1 convergence
NM center point E1 汇聚点
E1-MUX_converter
E1_MUX_converter
E1_C-Converter
E1_MUX_ E1_C_converter
Converter E1
E1 E1 E1 network
LAN switch E1
networ
networ
networ
E1 network
networ k E1 E1 network
k k E1 network
k other
other E1_MUX_converter
E1
E1
E1 network
E1 network E1 E1_MUX_converter
E1_MUX_converter
E1
E1_MUX_Converter E1
E1
network
network
E1
E1 E1_MUX_converter
network
network E1
E1 Acces
E1_MUX_Conv ETH s point
erter
DCN solution:
Configure one converter for each pass-through point, one C-Converter for the E1 convergence point, and one C-Converter and one LAN
switch for the NM center.
NMS
LAN
switch
60 NEs
E1
NM center E1
networ
E1_C-Converter networ
k 60 NEs
k
E1_MUX_Conve E1_MUX_
rter Converter E1_MUX_Converte
r
60 NEs
60 NEs E1_MUX_Conv
E1_MUX_Conve
erter
rter
50 NEs
E1
ETH
DCN solution:
Configure one LAN switch and one E1_C-Converter for the NM center, and one E1_Converter for each subnet.
OptiX RTN 600 NMS Transparent Transmission Solutions via Third Party 3MS
Huawei RTN DCN Mix 3rd Party Solution V1.0 (20090828) 3MS
OptiX RTN DCN documentation – Hardware Interfaces and Solutions V1.0
3MS
(20090814)
Microwave DCN White Paper 1.1 3ms
OptiX RTN Pre-Sales and After-Sales DCN Pass-Through Planning Guide
3ms
V1.02