Conventional ultrasound testing uses pulse echo principles where a single or double probe scans materials and interprets echoes based on amplitude and sharpness. However, this method is operator dependent, relies on defect orientation, has limitations in defect characterization, and does not provide a test record. The document also provides illustrations of probe placement for inspecting various weld configurations in materials.
Conventional ultrasound testing uses pulse echo principles where a single or double probe scans materials and interprets echoes based on amplitude and sharpness. However, this method is operator dependent, relies on defect orientation, has limitations in defect characterization, and does not provide a test record. The document also provides illustrations of probe placement for inspecting various weld configurations in materials.
Conventional ultrasound testing uses pulse echo principles where a single or double probe scans materials and interprets echoes based on amplitude and sharpness. However, this method is operator dependent, relies on defect orientation, has limitations in defect characterization, and does not provide a test record. The document also provides illustrations of probe placement for inspecting various weld configurations in materials.
Conventional ultrasound testing uses pulse echo principles where a single or double probe scans materials and interprets echoes based on amplitude and sharpness. However, this method is operator dependent, relies on defect orientation, has limitations in defect characterization, and does not provide a test record. The document also provides illustrations of probe placement for inspecting various weld configurations in materials.
WORKS ON PRINCIPLE OF ULTRASONIC WAVE REFLECTION. SINGLE / DOUBLE PROBE SCANNING. INTERPRETATION BASED ON ECHO AMPLITUDE & SHARPNESS. Limitations Of Pulse Echo OPERATOR DEPENDENT DEPENDS ON DEFECT ORIENTATION DEFECT CHARACTERISATION TEST RECORD NOT AVAILABLE Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration Probe Placement for several weld configuration