Professional Documents
Culture Documents
Portable Fundus Camera FC160
Portable Fundus Camera FC160
Product Features
Target Markets
Retina Images Display
Product Advantages
Operation Instruction
Common Questions from Customer
45°
In-device Patient
45° Visual Field
Case Management
The Miracast technology
The Miracast
enables doctors to show The 45°visual field Doctor can input patient
technology
retinal image enables
on the large enable doctors to info. and build up patient
doctors to show
screen synchronically check basic retina file in the device.
retinal image
with FC 160. Thison the
helps situation of the
large
doctorsscreen
to illustrate and patients.
educate pathologywith
synchronically with
FC 160. This helps
others.
doctors to illustrate
and educate
pathology with others.
Target Markets
District
First Class
Community Hospital/Endo
Hospital/
Health Care crinology
Endocrinology
Endocrinology
District
Hospital/ First Class
Community
Ophthalmology Ophthalmolo Hospital/
Health Care
gy Ophthalmology
Diabetic Retinopathy
Screening Glaucoma Screening
Desk Top
Fundus Camera
Hand-held
High cost-
Fundus Camera
performance
effectiveness!
Retinoscope
Why Choose FC 160
佳能的 logo
去掉一下
FC160 Specification
Hand-held Eyepiece
fundus cover
camera
Power
adaptor
Carry
case
Recharging
Station
USB Cable
Operation Instruction
Touch
Screen Power
Indicator
Capture
Button
Recharging Device
Station
Switch
Scope
ring USB slot
SD card slot
Scope
Focusing Wheel
Rechargi
ng port
Operation Instruction
Install the protecting cover onto the front end of the scope.
Operation Instruction
Power Indicator
Photo Mode
ISO Gain Adjustment Values range from 1B~10B. The larger value indicates
higher brightness. It is suggested to set at 5B~6B.
After inputting patient info., you will be able to build up a new folder for the patient.
All the photos and video shoot for this patient will be saved in this particular folder
naming with patient’s name and ID. Every time you build up a new file, there will be a
new separate folder for the patient.
Note: If the patient name and ID already exists in the device, the device will not make
a new file but open the existed file.
Operation Instruction
1.Use one hand to hold the device
handle with thumb putting on the
capture button and index finger
positioning on the focusing wheel.
Operation Instruction
Problem shooting :
Problem Shooting:
Problem Description Possible Reason Demo Photo
HDMI connector
USB cable
1. Please don’t make lens dirty by finger print or dirt. Otherwise, the image quality
will be affected.
2.Please put the device with protecting cover back to the case after usage.
3 . Clean the lens
• Blow out dirt gently.
•Prepare solution made of Ethanol and Diethyl ether mixed at 2:8.
•Dip soft cloth to the solution mentioned above and clean the lens surface starting
from the center. You can clean it repeatedly if necessary. Please do not clean it
roughly to avoid scratch.
•If the lens is still dirty, please don’t clean it repeatedly to avoid damage on the
surface.
Operational Cautions
A . Settings
1.Time Setting
1 ) press setting>time >Automatic date&time>off
If you don’t select Off,you will not be able to set time and date.
2 ) Set date>Select date>Finish
3 ) Set time>Select time>Finish
Note: Please check if the current date and time is correct before using the device.
Otherwise, it will be difficult to find the new images you captured.(The system display the
images in time and date order.)
2.When you press the capture button, please don’t move device and wait for 1 second to finish image
shooting.
Common Problem Shooting
1.Preview interface in black screen or unable to capture image
A. Please check if the connection between scope and main device is loose. Please hold the
scope and rotate it in clockwise direction thoroughly.
B. Check settings and see if Flash mode is “off”. Please make sure the flash mode is “on”.
2. The screen become black screen in short time after switch on the device
Check the Standby in settings and select longer standby time.
3. When you switch on the device and capture image but you did not find the image you
captured in any folder.
You must build up a new patient file before capture image, otherwise, the image will not be
saved.
5. When there are more than 2 patient files in the device, how to check each patient file
respectively ?
Press image icon in the right down corner and enter album interface. You can check each
patient file in the album interface.
6. When you build up new patient file and press next, the device does not respond. In this case,
please press icon “▽”
Thank You