Professional Documents
Culture Documents
VBL Vung Tau-Training Day 1
VBL Vung Tau-Training Day 1
INTRODUCTION
SAFETY REQUIREMENTS
SYSTEM FEATURE
TRAINING PURPOSE
• Overall of Generator System
• Feature of Generator System
TRAINING METHODOLOGY
Classroom
Practical activities
SEA POWER:
AUTHORIZED DEALER OF DEIF.
THE SYNC PANEL BUILDER.
• SAFETY MESSAGE
• PERSONAL PROTECTION EQUIPMENT
• FIRE AND EXPLOSION PREVENTION
• EMERGENCY STOP BUTTON
• Overall
• Single Line Diagram
• Genset
• Transformer
• SYNC panel
• MV Panel
CAT GENSET
SYNCHRONIZATION
PANEL
MV SWITCHGEAR
STEP UP TRANSFORMER
Alternators
• Superior motor starting capability minimizes
need for oversizing generator
• Designed to match performance and output
characteristics of Cat diesel engines
Cooling System
• Cooling systems available to operate in
ambient
temperatures up to 50°C (122°F)
• Tested to ensure proper generator set cooling
Cat® Diesel Engine EMCP 4 Control Panels
• Designed and optimized for low emissions or • User-friendly interface and navigation
low fuel consumption • Scalable system to meet a wide range of
• Reliable performance proven in thousands of installation requirements
applications worldwide • Expansion modules and site specific
programming for specific customer
requirements
Control
•Run / Auto / Stop control
•Speed and voltage adjust
•Local and remote emergency stop
•Remote start/stop
•Cycle crank
Generator Protection
•Generator phase sequence
•Over/Under voltage (27/59)
•Over/Under frequency (81 O/U)
•Reverse Power (kW) (32)
•Reverse Reactive Power (kVAr) (32RV)
•Overcurrent (50/51)
•Thermal Damage Curve
DEIF Controller
The Automatic Genset Controller, AGC, is a control unit containing all necessary
functions for protection and control of a genset. It can be used as a single unit for one
genset, or a number of AGCs can be connected in a complete power management
system for synchronising projects, islanded or paralleled to the mains. The AGC
contains all necessary 3-phase measuring circuits, and all values and alarms are
presented on the sunshine proof LCD display.
1 x 22 kV panel: T20-03.
- Location: in the HV room.
- Model: Unisec
- Main function:
Synchronize 04 sources from 04 transformers together by T20-03 CB2, CB3, CB4,
CB5.
Provide 01 outgoing way to T20-02 CB8 by T20-03 CB1.
- Specification:
VD4/R-Sec, 24kV, 630A, 20kA
- Controller REF615
• TESTING