Professional Documents
Culture Documents
ETX - 203AX and 205A - Presentation
ETX - 203AX and 205A - Presentation
ETX-205A
Product Introduction, Ver. 4.01 GA
April 2011
• Introduction
• Product overview
• Target customers and Applications
• Main features
• Management
• Ordering information
• Value proposition
ETX-5300A
ETX-203A
ETX-202
ETX-102
Scale
Customer HQ
RADview FE/GbE
GbE RADview ––
EMS
EMS & Service
& Service Center
Center
ETX-203AX
ETX-205A
Service Provider GE
Network
ETX-205A
GE
ETX-205A
GE
RNC/4G
gateway ETX-205A
3G/4G LTE
eNB
SLA Assurance, PM management, Resiliency
ETX-203AX/ETX-205A Version 4.0 Slide 4
Product Overview
Management ports
•Out of band - Ethernet port
•Local craft terminal - RS-232
Redundant power
supplies:
•AC: 100–240VAC, 50-60Hz
•DC: 24/48VDC
Customer HQ
ETX-203AX/205A
GbE SONET/ EoPDH
SDH
ETX-205A
ISP
Wholesale
Packet Network
PE ETX-203AX
RNC/4G Gateway
Service Provider
ETX-205A
L2/L3/MPLS
Network PE Wholesale
TDM Network
ETX-203AX/205A
SONET/ EoPDH
SDH
GbE
ETX-205A
ETX
IP NodeB
External Clock
Source
PoP Site
PE PE
ETH
Sync-E
IEEE 1588-2008 (1588v2) ETH
ETX IP NonedB
Point-to-Multipoint EVC CE
• E-LAN: any-to-any
– Single bridge instance per UNI (EPLAN) UNI UNI
CE
CE
– Several (virtual) bridge instances per UNI
Carrier
(EPLAN) UNI Ethernet
CE Network UNI
Any-to-any EVC CE
CE
ETX-203AX/ETX-205A Version 4.0 Slide 18
ETX Traffic Management
are
r dw
Ha AM
Summary of available Ethernet OAM mechanisms
O
Fast detection of
connectivity failure
X √ Fast failure restoration <50msec
Measurements of real
frames as well as synthetic X √ Detects loss of even a single frame
frames
Provides accurate FD/FDV
Accurate measurement of
delay and delay variation
X √ measurements (nano second
resolution)
Allow line rate loopback for all MTU
Loopback at line rate X √ sizes, plus PRBS support
Fully participate as a maintenance
MIP Support X √ intermediate point (MIP) between
MEPs
ETX-203AX/ETX-205A Version 4.0 Slide 22
Ethernet OAM features
Network
Tester
ETX-203AX/ETX-205A Version 4.0 Slide 26
RFC-2544 Measurements to Ensure Service
Parameters
Branch A
Traffic Generation and loopback per
Headquarters RFC-2544 Real Time
PE ETX
UNI EVC
Priority Data
UNI
Test Parameters
-------------------------------------------------------------------------------------------------------------
Bind: MD:<MD id>, MA <MA id>, MEP <MEP id>, p-bit <pbit>, VLAN <vlan>
Maximum Theoretical Rate: <Maximal defined Rate> [FPS]
Duration: <Duration> Pattern: <Frame Pattern>, Frame Type <frame type> Opcode <Opcode>, mode <mode>
Search resolution <Search resolution>, Tolerance <tolerance>, Trials <Number of trials>
Learning Frames: Number of frames <number of frames>, Frequency <Frequency>
Throughput Report
< Trial #>:
========
Status: SUCCESS { or FAIL – Link down, OAM connectivity failure } Duration: <HH:MM:SS>
Frame Size [bytes] | 64 | 128 | 256 | 512 | 1024 | 1280 | 1518 |
Theoretical maximum [fps] |10000 | 5000 | 2500 | 1250 | - | - | 500 |
Throughput [fps] |9500 | 4900 | 2490 | 1250 | - | - | 500 |
success [%] | 95 | 98 | 99.6 | 100 | - | - | 100 |
Latency Report
< Trial #>:
========
Status: SUCCESS { or FAIL – Link down, OAM connectivity failure } Duration: <HH:MM:SS>
Frame Size [bytes] | 64 | 128 | 256 | 512 | 1024 | 1280 | 1518 |
Latency [ms] |50 | 45 | 42 | 37 | - | - | 24 |
ETX-203AX/ETX-205A Version 4.0 Slide 29
RFC-2544 Reports on RADview
Frame loss
Delay
Measurement
Throughput
PSN
• Dual homing
– 1:1 connectivity to two different upstream devices for node redundancy
Dual homing
• Switch criteria:
– Loss Of Signal (LOS) indication
CPE
– Manual commands PSN
1 CC OAM 2
RDI on CC message
1 CC OAM 2
RDI on CC message
1 CC OAM 2
1 2
DHCP
ETX w/ Server
DHCP
CPE Client
PSN
IEEE 1588-2008
Grandmaster Clock
Transport
PoP Site
Network:
PE ETH/IP/MPLS PE TC
RNC/ ETH
4G GW
ETX
IP NodeB
Sync-E
• 1588v2 provides clock distribution over any packet networkIEEE 1588-2008 (1588v2)
– Accurate timing - frequency lock ±16ppb
• ETX product line offers Transparent Clock (TC) with HW-
based time stamping
• ETX-205A is HW ready for 1588v2 slave and Time of Day
(ToD) functionalities
• 1588v2 encapsulation over IP\UDP
Intuitive GUI, visual Real time device inventory, SLA Assurance System
Topology, Visual status location, port count. Real time PM, utilization and
indication , data validation. CAPEX saving and capacity threshold management.
Saves 50% time in planning Premium services , trending
configurations and analysis
Model Description
ETX-205A/AC/19/SYE 6 combo GE ports, single AC power supply, 19” metal enclosure, Sync-E
support.
ETX-205A/ACR/19/PTP 6 combo GE ports, 2 AC power supply (redundant), 19” metal
enclosure, Sync-E support, HW ready for 1588v2.
ETX-205A/DCR/19/GPS 6 combo GE ports, 2 DC power supply (redundant), 19” metal
enclosure, Sync-E support, integrated GPS receiver for one-way delay
measurement
Model Description
ETX-203AX/2SFP/4UTP 6 FE ports (2 SFP network ports, 4 UTP user ports), 2 shaped
services, AC/DC power supply in ½ 19” plastic enclosure
ETX-203AX/2SFP/2SFP2UTP 6 FE ports (2 SFP network ports, 2 SFP and 2 UTP user ports), 2
shaped services, AC/DC power supply in ½ 19” plastic enclosure
SW options Description
GE Upgrade all ports to GbE
GE30 Upgrade all ports to GbE, allow 30 shaped services
www.rad.com