Professional Documents
Culture Documents
Me8593 Design of Machine Elements: M.A.M. College of Engineering and Technology
Me8593 Design of Machine Elements: M.A.M. College of Engineering and Technology
COURSE NAME
10/14/2020
Version: MAMCET_VP-1.1 1
Syllabus
10/14/2020 2
10/14/2020 3
TEXT BOOK AND REFERENCE BOOK
10/14/2020 4
OTHER REFERENCE BOOK
• 1.Machine design By RS Khurmi (Design of machine elements and
Design of transmission system)
10/14/2020 5
UNIT II TEMPORARY AND PERMANENT
JOINTS
TEMPORARY JOINTS
-Bolted Joints
-Knuckle joints
-Cotter joints
PERMANENT JOINTS
-Welding Joints
-Riveted joints
13.08.2020
6
WELDING JOINTS
10/14/2020 7
TYPES OF WELDED JOINTS
• 1.Lap joint
• 2.Butt joint
3.T Joint
4.Corner joint
10/14/2020 8
Lap joints
10/14/2020 9
Combination of transverse and parallel fillet weld
10/14/2020 10
10/14/2020 11
Stress of welded joints
• 1.Shear stress
• 2.Bending stress
10/14/2020 12
Eccentrically loaded bolted joints
10/14/2020 13
10/14/2020 14
Stresses in bolted joints
• 1.Tensile stress and tensile load
• Where
• Wt=Tensile load
• Ws=Shear load
10/14/2020 15
Eccentric load acting on plane containing the
bolt
10/14/2020 16
• W1=Load on bolt 1
• W2=load on bolt 2
• W3=load on bolt 3
10/14/2020 17
Formulae
10/14/2020 18
10/14/2020 19
CIA -2 TEST (Question pattern)(Total marks =100)
• PART –A Multiple choice questions -Marks =50 (Google form )
• Timing :one hour
-MCQ –first 30 Questions each questions one mark=30marks
Remaining 10 questions short answer =20 MARKS each questions two
marks.
PART B –Written test (40 marks) 1 HR 30 MINUTES
1.Two marks =20mark (10 Questions )
2.Part B =20 Marks (2 Questions either or type ) (Unit -2 &3)
PART C –VIVA QUESTION =10 MARKS (30 MINUTES )
10/14/2020 20
CIA-II OR UNIT TEST -2
• UNIT-II Shaft and couplings
• 1.Design of shaft
-Shaft subjected to twisting and bending moment
-Shaft subjected to twisting and bending moment with fatigue and
shock factor .
-Shaft subjected to twisting and bending moment with axial load
II.Couplings 1.Flange coupling 2.Flexible coupling
-
10/14/2020 21
UNIT-3
TEMPORARY JOINTS
-Bolted Joints
-Knuckle joints
PERMANENT JOINTS
-Welding Joints
10/14/2020 22
Riveted joint
10/14/2020 23
Types of riveted joint
• Lap joint
• Butt joint
Dr. B. Muruganantham., Professor, Department of Electrical and Electronics Engineering, M.A.M. College of 24
10/14/2020
Engineering and Technology, Siruganur, Tiruchirappalli – 621 105.
10/14/2020 25
• Lap Joint
A lap joint is that in which one plate overlaps the other
and the two plates are then riveted together.
Butt Joint
A butt joint is that in which the main plates are kept in
alignment butting (i.e. touching) each other and a cover plate
(i.e. strap) is placed either on one side or on both sides of the
main plates. The cover plate is then riveted together with the
main plates.
10/14/2020 26
Single riveted double strap butt joint
10/14/2020 27
• Design of Boiler Joints
The boiler has a longitudinal joint as well as
circumferential joint. The longitudinal joint is used to join the
ends of the plate to get the required diameter of a boiler.
• For this purpose, a butt joint with two cover plates is used.
• The circumferential joint is used to get the required length of the
boiler. For this purpose, a lap joint with
one ring overlapping the other alternately is used
10/14/2020 28
10/14/2020 29