Professional Documents
Culture Documents
Classimate Faults and Reasons Chart
Classimate Faults and Reasons Chart
Classimate Faults and Reasons Chart
*+150% A2 B2 C2 D2
Bad condition of card Fiber damage in process Bad piecing cans Satle gauge proble
blowroom trash in yarn spindle guage out Sliver Entagiment Spacer Aprons unacceptable Faults
MINOR FAULT MINOR FAULTS MINOR FAULTS MINOR FAULTS
MAJOR FAULTS
*+100% A1 B1 C1 D1 E
Bad condition of card Fiber damage in process Bad piecing cans Floating fiber Doubling Yarn
blowroom trash in yarn spindle guage out Sliver Entagiment Long Thick Places
0.1 CM 1 CM to 2 CM 2 CM to 4 CM 4 CM to 8 CM MAJOR FAULTS MAJOR FAULTS
Long thick places Long thick places
*+45 CM F G
-30% Bad pc in Ring Bad pc in Ring
Simplex Back process etc Simplex Back process etc
MINOR FAULTS MINOR FAULTS
-45% H1 I1
Bobbins of Simplex & Ring Long thin places type of
Accentric Spindle Thin Places Fault are produced by Salacation of Sliv er
-75% H2 I2
Poor Handling of Material Long Thin Places
During Process Thin Places
8 CM TO 32 CM ABOVE