Professional Documents
Culture Documents
Gtmzxur 9000 GSM Omm Commissioningr10pptx
Gtmzxur 9000 GSM Omm Commissioningr10pptx
Version Introduction
Version Date Author Checked by Amendment Record
References:
1. ZXM-OMMR (V4.12.11.40) Commissioning Guide_R1.0.doc
2. V4 Omm and Logserver Installation Guide.docx
Internal Only▲
Course Objectives
:
To get to know the Logserver & OMM networking
To become familiar with the functions of the hard
ware interfaces of SBCJ and EGBS
To become familiar with the functions of the Logs
erver & OMM software
To master how to install the Logserver & OMM S
oftware
Internal Only▲
Contents
(CORBA/SNMP/DB/CSV
EML
NetNumen M31
DCN
RNC
iBSC ZXUR 9000
Logserver&OMM
SBCJ
5
Internal Only▲
Router Switch
WAN
TCP/IP LAN
WAN
Prefecture-Level City A Prefecture-Level City B
NE1 & OMM1 NE2 & NE3 &
Router
Router OMM2 OMM3 M31 Client
Switch
Switch
Internal Only▲
Contents
The communication between OMM and OMP, or the communication between the active
and standby SBCJ is completed by the backplane of the shelf. Therefore, no cables are r
equired.
However, the network cables are required for the communication among the OMM server
, EMS Server, and OMMClient.
Internal Only▲
RST USB
EGBS board
EGBS- MP- CMM- ETH-C2
OK/HOST OOS/OK/H/S ETH-M OOS/OK/H/S ETH-C1 HOST-232 ETH1/2/3/4 H/S EXCH RST
Introduction to Bond2
Function of the Port Location in the Channel Channel Name NetIfName IP
Configuration File Number
Introduction to Bond0
Function of Location in Channel Channel NetIfName IP
the Port the Number Name
Configuration
File
OMM LogNetIf.conf Channel 6 OMM_M Bond0 128.0.28.1/9
Active/Standby S
Channel
OMM LogNetIf.conf Channel 6 OMM_M bond0:1 128.0.29.1/9
Active/Standby S
Channel
OMM LogNetIf.conf Channel 6 OMM_M bond0:2 128.0.30.1/9
Active/Standby S
Channel
Internal Only▲
External Addresses
Function of Location in Channel Channel NetIfName IP
the Port the Number Name
Configuration
File
OMM Server LogNetIf.conf Channel 7 OMMCLIENT eth2:1;eth3:1 Plan it on site.
OMCB TD LogNetIf.conf Channel 8 OMCB_TCLIE eth2:2;eth3:2 Plan it on site.
CLIENT NT
OMCB UMTS LogNetIf.conf Channel 9 OMCB_UCLIE eth2:3;eth3:3 Plan it on site.
CLIENT NT
Contents
appli
catio OMMR&OMMB&Logserver
n
OM
database
M
Oracle 10g
DBMS
Operating system
OS Carrier Grade Server
Linux
Internal Only▲
• LogserviceVerInfo.conf
• BrdPhyAddr.conf
• System.conf
Internal Only▲
Contents
nufacturer
The 64-bit Linux operating system CGSL V3.01.12 provided by the Ch
engdu R & D Center is already installed.
The logservice is already installed, but it needs to be updated accordin
g to the planned version during the commissioning process.
The oracle is already installed.
Five database instances are already installed: v4omcr/gomcb/gultomc
b/tomb/womcb.
The following users and passwords are already created by the operati
ng system:
root/root123
omm/Omm_123(/home/omm)
oracle/Oracle_123
zte/Zte_1234
The following services are provided: VNC, SSH, FTP, and telnet.
By default, the external IP address is as follows: 119.0.200.200.
Installation of the OMM and Logserver Softwa
Internal Only▲
re
1. IP address planning
Do the IP address planning for the OMMServer service and for the active/standby SBCJ board
management.
For the control plane and media plane inside, the default configuration of the active/standby n
etwork port can be used directly without any planning or modification.
2. Install the target version of the Logservice
The Logservice software is released together with the software version of ZXUR 9000 : \GsmT
ools\logservice_V6.50.100*_SBCJ.zip
Check the Logservice version which is provided when the product is delivered. If it is not the ta
rget version, it should be uninstalled first and then the target version can be installed.
3. Execute and set the script related to the OMM environment parameters.
The script is released together with the OMMR version: (\ums-svr\tools\ommconf).
omm_conf.py is the main script.
Main functions of the script:
Clarify the location of the board: left board or right board.
Configure the OMM related ip addresses. Actually, this is realized by modifying the configuration files (Lo
gNetIf.conf and NetIf.conf ) of the Logservice.
Configure the auto-start function of the database instances and the auto-start function of the omm. Confi
gure the relevant listener and tnsname file.
Internal Only▲
Chapter/Course Review