Professional Documents
Culture Documents
Stencil Testing & Cleaning: Process Detail
Stencil Testing & Cleaning: Process Detail
Process Detail
Check the tension meter the reading needel should be on zero
Placed the tension meter on the edges of the stencil & measured
the value at the 4 corner & center point
The reading range is (35 to 60) N & the delta difference less then
10N between any two point.
The stencil cleaning process by machine used the chemical
isoproply alchol to clean the stencil
The frequency cycle is once in a shift during the starting through
machine
Every 2 hour on line production manually stencil cleaning by
vaccum pressure or aquous solution
Automatic stencil
The operation procedure will follow as per the SOP standrad
Stencil Tension measurement Stencil Measurement Process
measurement machine
Observation/Suggestion
Gloves ,mouth mask ,aqueous solution used during cleaning
Temperature should be maintain as per the standard.
Check the nozzel & air pressure of the cleaning machine
Check sheet should be maintain to verify the each visit status.
Observation/Suggestion
Operator should wear wrest band, apron and cap at floor
Placed the HIC card in the board & update the MSL
label tracking.