Professional Documents
Culture Documents
Topic 4 1 Kinematics of Simple Harmonic Motion
Topic 4 1 Kinematics of Simple Harmonic Motion
Topic 4 1 Kinematics of Simple Harmonic Motion
v = vmax
gravitational field.
v = vmax
internally, like a mass on
v = 0
v = 0
a spring.
FYI
In all oscillations
v = 0 at the extremes
and v = vmax in the x
middle of the motion.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Describe examples of oscillation.
Oscillations are vibrations which repeat
themselves.
EXAMPLE: They can be very
rapid vibrations such as in
a plucked guitar string or
a tuning fork.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define the terms displacement, amplitude, r ium
i l ib
frequency, period, and phase difference. equ
Consider a mass on a
spring that is displaced
4 meters to the right x
and then released.
x0
We call the maximum displacement x0 the
amplitude. In this example x0 = 4 m.
We call the point of zero displacement the
equilibrium position.
The period T (measured in s) is the time it
takes for the mass to make one
complete oscillation or cycle.
For this particular oscillation, the
period T is about 24 seconds (per cycle).
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define the terms displacement, amplitude,
frequency, period, and phase difference.
The frequency f (measured in Hz or cycles/s) is
defined as how many cycles (oscillations,
repetitions) occur each second.
Since period T is seconds per cycle, frequency
must be 1/T.
f = 1/T T = 1/f relation between T and f
EXAMPLE: The cycle of the previous example
repeated each 24 s. What are the period and the
frequency of the oscillation?
SOLUTION:
The period is T = 24 s.
The frequency is f = 1/T = 1/24 = 0.042 Hz
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define the terms displacement, amplitude,
frequency, period, and phase difference.
We can pull the mass to the right and then
release it to begin its motion:
Start
stretched
x
The two motions are half a cycle out of phase.
Start
compressed
x
Or we could push it to the left and release it:
The resulting motion would have the same values
for T, f, and .
However, the resulting motion will have a phase
difference of half a cycle.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define the terms displacement, amplitude,
frequency, period, and phase difference.
PRACTICE: Two identical mass-spring systems are
started in two different ways. What is their
phase difference?
Start stretched
and then release
x
Start unstretched
with a push left
x
The phase difference is a quarter of a cycle.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define the terms displacement, amplitude,
frequency, period, and phase difference.
PRACTICE: Two identical mass-spring systems are
started in two different ways. What is their
phase difference?
Start stretched
and then release
x
Start unstretched
with a push right
x
The phase difference is three quarters of a
cycle.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
Before we define simple harmonic motion, which is
a special kind of oscillation, we have to digress
for a moment and revisit uniform circular motion.
Recall that UCM consists of the motion
of an object at a constant speed v0 v0
in a circle of radius x0.
x0
Since the velocity is always changing
direction, we saw that the object had
a centripetal acceleration given by
a = v02/x0, pointing toward the center.
If we time one revolution we get the
period T.
T is about 12 s.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
We say that the angular speed of the object is
360 deg/12 s = 30 deg s-1.
In Topic 4 we must learn about an alternate and
more natural method of measuring angles besides
degrees.
They are called radians.
rad = 180° = 1/2 rev radian-degree-revolution
2 rad = 360° = 1 rev conversions
FYI x0
Angular speed is also called
angular frequency.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
rad = 180° = 1/2 rev radian-degree-revolution
2 rad = 360° = 1 rev conversions
x0
x0
x0
has a ball glued onto its
x0
x0
edge. We project a strong
x 0 x0 x
light to produce a shadow of x0
x0
x0 0
the ball’s motion on a screen.
x
x0
Like the mass in the mass-
spring system, the ball
behaves the same at the arrows:
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
Note that the shadow is the
x-coordinate of the ball.
Thus the equation of the x
-x0 0 x0
shadow is x = x0 cos .
FYI
From = /t we get = t.
0
v
Therefore the equation of the v0
0
x
shadow’s x-coordinate is x
0 x
x = x0 cos t.
x = x0 cos
If we know , and if we know t,
we can calculate x.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
At precisely the same instant we can find the
equation for the shadow of v.
Create a velocity triangle.
Working from the displacement
v0
triangle we can determine the
angles in the velocity triangle. 90
-
The x-component of the velocity
is opposite the theta, so we use
sine: v = -v0 sin .
0-
0
But since = t we get our
x
9
final equation:
v = -v0 sin t.
Why is our v negative?
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
Remember the acceleration of the mass in UCM?
We found recently that aC = x02.
And we know that it points to v0
the center.
The x-component of the acceleration
is adjacent to the theta, so we use
cosine: a = -aC cos .
But since = t we get our aC
final equation and aC = x02 we have
0
x
a = -x02 cos t.
Why is our a negative?
Since x = x0 cos t we can just
write a = -2x.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
Let’s put all of our equations in a box-there are
quite a few!
x = x0 cos t = 2/T Set 1 - equations of
v = -v0 sin t = 2f simple harmonic motion
a = -x02 cos t v0 = x0
a = -2x x0 is the maximum displacement
v0 is the maximum speed
This equation set works only for a mass which
begins at x = +x0 and is released from rest at
t = 0 s.
v0
We say a particle is undergoing simple
harmonic motion (SHM) if it’s
x0
acceleration is of the form a = -2x. x
Data Booklet has highlighted formulas.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
Without deriving the other set in the Physics
Data Booklet, here they are:
x = x0 sin t = 2/T Set 2 - equations of
v = v0 cos t = 2f simple harmonic motion
a = -x02 sin t v0 = x0
a = -2x x0 is the maximum displacement
v0 is the maximum speed
This equation set works only for a mass which
begins at x = 0 and is given a positive
velocity v0 at t = 0 s.
If you are interested, this last set v0
x0
is derived from a clockwise-rotation
beginning as shown: x
Data Booklet has highlighted formulas.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Define simple harmonic motion (SHM) and state the
defining equation as a = -2x.
We need one more formula before we can practice.
Set 1: x = x0 cos t, v = -v0 sin t and v0 = x0:
Begin by squaring each equation from Set 1:
v2 = (-v0 sin t)2 = v02 sin2 t.
v02 = x022, and x2 = x02 cos2 t.
Then v2 = v02 sin2 t becomes
v2 = x022 sin2 t.
sin2 t + cos2 t = 1 yields sin2 t = 1 - cos2 t
so that v2 = x022(1 - cos2 t) or
v2 = 2(x02 - x02 cos2 t)
Then v2 = 22(x02 2- x2), which becomes
v = (x0 - x ) relation between x and v
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Apply the equations as solutions to the defining
equation a = -2x.
EXAMPLE: A spring having a
spring constant of 125 n m-1 x
is attached to a 5.0-kg mass, stretched +4.0
m as shown, and then released from rest.
(a) Using Hooke’s law, show that the mass-spring
system undergoes SHM with 2 = k/m.
SOLUTION:
From Hooke’s law F = -kx.
From Newton’s second law F = ma.
Thus ma = -kx or a = -(k/m)x.
The result of a = -(k/m)x is of the form a = -2x
where 2 = k/m.
Therefore, the mass-spring system is in SHM.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Apply the equations as solutions to the defining
equation a = -2x.
EXAMPLE: A spring having a
spring constant of 125 n m-1 x
is attached to a 5.0-kg mass, stretched +4.0
m as shown, and then released from rest.
(b) Find the angular frequency, frequency and
period of the oscillation.
SOLUTION:
Since 2 = k/m = 125/5 = 25 then = 5 rad s-1.
Since = 2f, then f = /2 = 5/2 = 0.80 Hz.
Since = 2/T, then T = 2/ = 2/5 = 1.3 s.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Apply the equations as solutions to the defining
equation a = -2x.
EXAMPLE: A spring having a
spring constant of 125 n m-1 x
is attached to a 5.0-kg mass, stretched +4.0
m as shown, and then released from rest.
(c) Show that the position and velocity of the
mass at any time t is given by x = 4 cos 5t and
that v = -20 sin 5t.
SOLUTION:
Note: 2 = k/m = 125/5 = 25 so = 5 rad s-1.
Note: x0 = 4 m, and v0 = xo = 4(5) = 20 m s-1.
At t = 0 s x = +x0 and v = 0, so use Set 1:
x = x0 cos t and v = -v0 sin t
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Apply the equations as solutions to the defining
equation a = -2x.
EXAMPLE: A spring having a
spring constant of 125 n m-1 x
is attached to a 5.0-kg mass, stretched +4.0
m as shown, and then released from rest.
(d) Find the position, the velocity, and the
acceleration of the mass at t = 0.75 s. Then find
the maximum kinetic energy of the system.
SOLUTION:
x = 4 cos 5t = 4 cos 5(.75) = 4 cos 3.75 = -3.3 m.
v = -20 sin 5t = -20 sin 5(.75) = +11 m s-1.
a = -2x = -52(-3.3) = 82.5 m s-2.
EK,max = (1/2)mvmax2
= (1/2)mv 2
= (1/2)(5)(202) = 1000 J.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Solve problems, both graphically and by
calculation, for acceleration, velocity and
displacement during SHM.
EXAMPLE: The displace-
ment x vs. time t for a
2.5-kg mass is shown
in the sinusoidal graph.
(a) Find the period,
the angular velocity,
and the frequency of the motion.
SOLUTION:
The period is the time for one complete cycle. It
is T = 6.010-3 s.
= 2/T = 2/0.006 = 1000 rad s-1. [1047]
f = 1/T = 1/0.006 = 170 Hz.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Solve problems, both graphically and by
calculation, for acceleration, velocity and
displacement during SHM.
EXAMPLE: The displace-
ment x vs. time t for a
2.5-kg mass is shown
in the sinusoidal graph.
(b) Find the velocity
and acceleration of the
mass at t = 3.4 ms. Why is v negative?
SOLUTION: Because the slope is!
From the graph x = -0.810-3 m at t = 3.4 ms.
From the graph x0 = 2.010-3 m. Thus
v = (x02 - x2) = -1047 (0.0022 - 0.00082)
=
-1.9 m s-1.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Solve problems, both graphically and by
calculation, for acceleration, velocity and
displacement during SHM.
PRACTICE: The
displacement x
vs. time t for
a 2.5-kg mass
is shown in the
sinusoidal
graph.
(a) Find the period and the angular frequency of
the mass. Then find the maximum velocity.
The period is the time for one complete cycle. It
is T = 6.0 s.
= 2/T = 2/6 = 1.0 rad s-1. [1.047]
v0 = x0 = 1.4(1.047) = 1.5 m s-1.
Topic 4: Oscillations and waves
4.1 Kinematics of simple harmonic motion
Solve problems, both graphically and by
calculation, for acceleration, velocity and
displacement during SHM.
PRACTICE: The
displacement x
vs. time t for
a 2.5-kg mass
is shown in the
sinusoidal
graph.
(b) Find the force acting on the mass at t = 3 s.
Then find it’s velocity at that instant.
Use F = ma where m = 2.5 kg.
At t = 3 s we see that x = -1.4 m.
Then a = -2x = -(1.0472)(-1.4) = 1.5 m s-2.
Then F = ma = 2.5(1.5) = 3.8 n.
Because the slope is zero, so is the velocity.