Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 34

Internal

OSC001004 ESM

ISSUE 1.0 www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved


 Upon completion of this course, you will
be able to:
 Understand the hardware
configuration of ESM.
 Grasp ESM Data Setting.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 2


Chapter 1 ESM Overview

Chapter 2 ESM Hardware Structure

Chapter 3 Data Setting

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 3


ESM Overview

C3 office C3 host
Local host
Prefecture & city level office

C4 office C4 office Network rebuilding ESM ESM


County level

Village &
town level Remote Remote
C5 office C5 office
module module

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 4


Features of ESM

 Each ESM can support 50,000 subscribers as a USM.

 Each ESM can support 10,000 trunk circuits as a TSM.

 Each ESM can support 30,000 subscribers and 4000 trunk

circuits as a UTM.

 Main Control Module, Interface Module and Centralized

Number Receiving Module are in one Rack.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 5


Features of ESM

 Use A32, one user can access to up to 608 subscribers.

 Compatible with SM, and existing SM can be upgraded to ESM

smoothly.

 Can provide E1 uplink to AM/CM, number of E1 can be

expanded smoothly.

 Can provide 2 STM-1 optical interfaces to AM/CM, can work

together with SM and RSM.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 6


Features of ESM

 Switch network is 16Kx16K.

 If the connection to the central module is broken, ESM can

perform the switching function independently, to support intra-

module call, outgoing call and store the bills generated.

 Backdoor trunk: ESM can provide outgoing trunk, which can

support SS7, R2 and PRA.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 7


Features of ESM

 Side door trunk: Two ESM can provide inter-connection trunk.

The speech connection will not go through the central module,

on the other hand, when one module is broken from the central

module, it can act as the lower module of the other module, to

contact with the central module.

 Support SSP. ESM can provide second number receiving, and

provide signal tone resources, can trigger the intelligent service

independently.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 8


Chapter 1 ESM Overview

Chapter 2 ESM Hardware Structure

Chapter 3 Data Setting

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 9


Hardware Structure of ESM

Resource Frame

Interface Frame

Main Control
Frame

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 10


Hardware Structure of ESM

 XNET is 16Kx16K switching network. Each OTU (optical

Transfer Unit) can provide one 155M optical interface.

 Interface Frame: Trunk Interface Frame. Each ET16 can

provide 16 E1s; Each STU board can provide one 155M optical

interface. Each H16 board can provide 16 HW to connect the

ASL frames.

 MEM: Intelligent Service Interface board. Each can provide one

10/100M Ethernet Interface.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 11


ESM Control Principle

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 12


ESM Switch Network

 ESM can support 2 XNET boards. Two boards work in active /

standby mode.

 XNET can perform the time switching of the subscribers'

speech and signaling system, it is a switching matrix of 16K x


16K.

 8K time slots for the two 393M optical interface from XNET
to QSI boards in Interface Frame.

 4K time slots to OTU boards for 2 STM-1 interfaces uplink


to AM/CM.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 13


ESM Switch Network

 3K time slots to be compatible with SM, to realize the


switching and transfer of subscriber speech and signaling.

 1K timeslots are used to support expanding user frame or


trunk frame by the HW expansion board on the back of
OTU board.

 It can also support 64-party conference and 192 time slots


FSK.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 14


ESM Subscriber Units

AM/CM SM

ESM1 ESM2
side door
trunk

RSA AN RSP RSMII

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 15


ESM Subscriber Units

 When an ESM functions as a pure subscriber module, its

interface frame can be configured with sixty-four 32-channel

RSP subscriber frames, 38,912 subscribers totally.

Correspondingly, it is necessary to configure two and a half

DRV frames, twenty HWs and six nodes.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 16


ESM Subscriber Units

 The other forty-four HWs from the switching network board can

be used to connect eleven 32-channel local subscriber frames,

6,688 subscribers totally. The thirty-two HWs from the HWD

board can connect eight 32-channel subscriber frames, 4,864

subscribers totally. Thus, 50,464 subscribers can be accessed.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 17


STM-1 upstream to the AM/CM

AM/CM
S S
T T AM/CM
155 M U U

SDH 155 M 155 M

Optical Optical SDH


coupler/splitter coupler/splitter

155 M 155 M

O O O O O O
ESM T T T T ESM ESM T T
U U U U U U

(active-standby mode)

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 18


STM-1 upstream to the AM/CM
AM/CM

2*155 M/2*63 E1

SDH

155 M 155 M

O O
ESM T T
U U

(load-sharing mode)

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 19


E1 upstream to the AM/CM

AM/CM

SDH

E1 E1

E E
T ESM T ESM
1 1
6 6

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 20


ESM side door trunk and rear door trunk

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 21


Chapter 1 ESM Overview

Chapter 2 ESM Hardware Structure

Chapter 3 Data Setting

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 22


ESM Data Setting

 Add a ESM module ( ADD ESM );

 Add main control frame ( ADD CFB );

 According to the requirements , modify the board configuration:

Remove board ( RMV BRD )、 Add board ( ADD BRD )

 According to the requirements , add Interface frame ( ADD

LIMFB )、 add DRV frame ( ADD DRVFB )、 add Digital

Trunk frame ( ADD DTFB ) and User frame ( ADD USF

B );
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 23
ESM Data Setting

 According to the requirements, modify the board configuration

in Interface frame ,DRV frame and DTF and user frame:

Remove board ( RMV BRD )、 Add board ( ADD BRD) ;

 Maintain card status ( MNT BRD );

 Add ESME1 ( ADD ESME1 ), configure E1 type and E1


mode, and configure OTU’s E1 type as IDT ;

 Add E1 configuration ( ADD E1CFG ), configure E1


between AM/CM and ESM.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 24


ADD ESM

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 25


ADD LIMFB

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 26


ADD DRVFB

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 27


ADD ESME1

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 28


ADD E1CFG

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 29


ESM Trunk Data Setting

 Compared with SPM and SM CCS7 trunk data setting, ESM

CCS7 trunk data setting are different in trunk circuit and CCS7

link setting .

 The related command are:

 ADD SMN7LNK-----Define CCS7 link in ESM.

 ADD SMN7TKC-----Define CCS7 trunk circuit in ESM,

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 30


ADD SMN7LNK

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 31


ADD SMN7TKC

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 32


Summary  This Course mainly includes

 Hardware configuration of ESM

 ESM Data setting.

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 33


Thank You
www.huawei.com

You might also like