Professional Documents
Culture Documents
IoT Home Security CU
IoT Home Security CU
Camera
Name: ID:
Name: ID:
Name: ID:
Introduction
This is the combination of IoT (Internet of Things) and Home Automation & security system.
In Home Automation where we use remote control but the controlling distance is too short.
We were able to control our load only when we were near to our device. But in this system
the distance is not a big deal. We can control our home appliances from anywhere. The
reason behind this, now our device is connected to internet through and we don’t send
command to our device directly. First we send the command in a cloud based web server and
then the server sends the signal to our device through the internet. And this is how the IoT
based Home automation System works. Also if any fire incident or gas leakage will happens
then the system will notify to the app and a fire hydrant pump will open and serve the water
until the fire goes off. Also we have a IP Camera so we can see the house from our mobile.
Block Diagram
Relay IP Camera
Gas Sensor
Flame
Sensor Mobile
User
App
Fire
Power
Hydrant
Supply
Pump
Equipment and Software
Equipment: Software:
1. NodeMCU 1. Arduino IDE
2. Relay Module 2. Blynk Server / Google Firebase
3. Gas Sensor (MQ2) 3. Blynk Mobile App
4. Fire Sensor
5. Buzzer
6. Electrical Load
7. Power Supply
8. ESP32 Cam
9. LASER Security
Specification