Professional Documents
Culture Documents
Automatic Water Dispenser
Automatic Water Dispenser
(USING ARDUINO)
Abstract
About 71% of earth is covered with water but sadly only 2.5% of is
drinking water . We are wasting too much of water in our day to
day life . if your tap dripped a drop of water once every second it
would take only about 5 hours for you waste one gallon of water ,
that is enough for an average human to survive for two days.
If we replace all the manual taps with the smart one that opens
and closes on its own automatically not , not only we can save but
also have a healthier lifestyle since we don’t have to operate the
taps with our dirty hands.
Existing solutions
There are many existing solutions are there ,
like water filling system , etc .
REQUIREMENTS
Arduino
Ultrasonic sensor
Resister
Breadbord
Connecting wires
Solenoid valve
Proposed solution
we will use a ultrasonic sensor to check if any
object such that glass is placed before the
dispenser . We have to write a arduino program
which always check if any object is placed near
the tap , if yes , then the solenoid will turn off
automatically thus closing the supply of water.
Advantages
We can save the water
Healthier lifestyle