Professional Documents
Culture Documents
Combine Harvesting Settings
Combine Harvesting Settings
Combine Harvesting Settings
Service
Cearfully read the Operator Manual.
Please be sure to shut down the engine & unplug the key.
Please open the radiator cap after the engine has cooled down.
Special Precautions for Maintainance &
Service
Raise the header to check the cleaning adjustment.
Pull out the safety lock of the feeder cylinder
Lock the cylinder as shown in picture for avoiding any incident due to
failure of hydraulic system.
Check Before Use
Check if coolant is sufficient
Open the water tank cover & check the water level
Ratio of coolant & water - 50:50
Level of coolant in standby tank -
Specific amount of coolant between full & low indiacator
in standy by tank.
Harvesting Speed -
Working speed must be from 2300-2500
RPM to avoid clogged
2500 RPM
Unloading Grain -
Engine speed must be at 1500 RPM to
avoid causing blockage & auger damage.
1500 RPM
Check before use
Diesel filter cleaning & Replacement
Use the chain wrench (spare box).
Remove the oil filter cup.
Replace the filter element
Please apply a layer of oil on the O ring & hand tighten the filter.
Tighten it by using chain wrench.
Use the genuin filter for high perfromance.
Check Before Use
Air precleaner filter cleaning