Professional Documents
Culture Documents
PATOQ-Plastering and Anti-Crack Application
PATOQ-Plastering and Anti-Crack Application
PATOQ-Plastering and Anti-Crack Application
Plastering and
Anti-crack Application
STANDARD AND GOOD PRACTICES
MIXING BOARD
PAIL
MATERIALS TO BE USED
CEMENT SAND
FIBRE MESH
ADHESIVE WATER
Plastering and Anti-crack Application
SKIMCOAT APPLICATION STEPS - PREPARATION
AREA TO BE APPLIED
BE READY
PLEASE LEND
US YOUR
EARS.
Plastering and Anti-crack Application
PLASTERING METHODOLOGY
1. Surface Preparation
- Determine the damage to your walls or ceilings, if there is a lot of damage (cracks or large holes), you must repair this first.
- Perhaps you have to flatten your popcorn ceiling or what we often called “burot” or “lalum”.
- Remove foreign objects or other contaminants on areas to be applied.
- Sweep away loose particles with dust brush.
- Damp the area with water.
Plastering and Anti-crack Application
PLASTERING METHODOLOGY
SKIMCOAT
Plastering and Anti-crack Application
PLASTERING METHODOLOGY
- Mark low areas with pencil using “kalis” or aluminum bars(used for checking)
Plastering and Anti-crack Application
PLASTERING METHODOLOGY
MAKE SURE THAT THE UNIT/ROOM IS CLEAN FREE FROM LAITANCE CAUSED BY APPLICATION OF SKIMCOAT. ALL
TOOLS ARE ARRANGED, WASHED AND WELL MAINTAINED FOR THE NEXT USE.
“HOUSEKEEPING”
Plastering and Anti-crack Application
SAFETY PROCEDURES
ALWAYS REMEMBER
WEAR YOUR APPROPRIATE SAFETY GEARS SUCH AS DUST MASKS / RESPIRATORS, GLOVES AND GOGGLES.
END