Professional Documents
Culture Documents
Design Dengan Microstrip: Sukiswo
Design Dengan Microstrip: Sukiswo
Design Dengan Microstrip: Sukiswo
Sukiswo
sukiswok@yahoo.com
Where
ZO = characteristic impedance of the microstrip, Ω
W = width of the microstrip conductor (use same units as h below)
h = thickness of the substrate between the groundplane and the microstrip
conductor (use same units as W)
Er = dielectric constant of the board material
Elektronika Telekomunikasi, Sukiswo ST, MT 18
Microstrip as Equivalent Componen
Distributed components, such as inductors and
capacitors, can be formed from microstrip
transmission-line sections on PCBs at microwave
frequencies.
A series or shunt inductor can be formed from a
thin trace (Fig. 1.44),
A shunt capacitor can be formed from a wide trace
(Fig. 1.45),
And even a transformer can be formed by varying
the width of the microstrip (Fig. 1.46).