Professional Documents
Culture Documents
Group 1 Micrometer and Caliper
Group 1 Micrometer and Caliper
-Debora Milda
- Shefty Yuliani Siregar
- Yenji Betaria Sonata Tampubolon
A. Calipers
Caliper is a measuring instrument whose accuracy can reach 1/10 or 0.1 mm.
2. The reading of measurement results is very dependent on the expertise and accuracy of the user
and the tool.
05
The measuring part is not visible in the
picture because it is on the side of the
holder
How to Measure Using a Caliper
1 2 3
Loosen the locking bolt and slide
The next step/how to use a caliper Close the jaw to flank the object
the sliding jaw, making sure the
is to clean the surface of the object being measured. Make sure the
sliding jaw works properly. Do
and the surface of the jaw so that position of objects in accordance
not forget to check when the jaw
there are no sticking objects that with the measurement to be taken.
is closed should show zero. If it
can cause measurement errors. Then just read the scale.
doesn't show zero, you can set it.
B. Micrometer
●A micrometer is a measuring instrument with high precision.
●Used for the length or thickness of the object, the depth of the hole
gap, and for Measure the diameter of an orifice.
Use of micrometer
1 2 3 4
● Measuring the
● Measuring the ● Measure the outer
diameter of a ● Measuring the
thickness of an diameter of an
hole in an depth of a hole
object object
object
Micrometers parts
Types of micrometers
1. Based on the type of scale
a. Manual Screw Micrometer
01 02 03 04 05
1 3
Then multiplied the nonius
Determine the main scale by the smallest scale
scale of the micrometer (0.01
mm).
2 4
Determine the nonius Then add up the major
scale and minor scales.
Thank you