Professional Documents
Culture Documents
EE-260 Lecture 07, 08, 09 Transformer
EE-260 Lecture 07, 08, 09 Transformer
Electrical Machines
Text Book: Chapter 02 (Stephen J. Chapman 4th Ed)
Bushing
Steel
Iron core tank
behind the steel
bar
Winding
Insulation
2
Radiator
Why Transformer are Important To
Modern Life
• The first power distribution system in U.S was invented by
Thomas A. Edison in 1882.
• It was 120V dc system to supply power for incandescent light
bulbs.
• The power was transmitted at very low voltage level.
• To minimize line losses power stations were located for every
few blocks of the city.
• The invention of transformer and concurrent development of ac
power sources eliminated these restrictions for ever.
3
Construction of Transformer
A transformer is a device that changes ac electric power from one voltage
level to another voltage level through the action of magnetic field. It has two
windings on a ferromagnetic core.
Primary winding – energized by connecting it to an input source
4
Types of Transformers w. r. t. Core Design
With respect to the core of the transformer, there are two types of the
transformers:
5
Types of Transformers w. r. t. Core Design
(cont…..)
The primary and secondary windings in a
physical transformer are wrapped one on the
top of the other with low voltage winding
innermost. Such an arrangement serves two
purposes:
L
Source V VP NP NS VS O
A
D
8
THE IDEAL TRANSFORMER
(cont……)
Ratio between:
• Input voltage (Vp) and the output voltage (Vs)
In instantaneous quantities
In rms quantities
9
THE IDEAL TRANSFORMER
(cont……)
Voltage polarity:
the Dot convention:
The dots are used to indicate polarities
Schematic symbol
10
TRANSFORMERS
11
11
TRANSFORMERS
12
12
TRANSFORMERS
13
13
14
14
15
15
Power in Ideal Transformer
Primary side:
The power supplied to the transformer by the source is given by:
Since voltage and current angles are unaffected for an ideal transformer.
16
Power in Ideal Transformer (cont….
Comparison of Input and The same relationship applies to
Output Power reactive power Q and the apparent
power S:
and
17
Voltage and Current Transformation
Through a Transformer
18
Impedance Transformation Through a
Transformer
• The impedance of a device is defined as the
ratio of voltage across it to the current
through it:
19
Impedance Transformation Through a
Transformer (cont…
• To analyze the circuit replace
the circuit on one side of the
transformer by an equivalent
circuit with the same terminal
characteristics.
• The process of representing an
element on one side of
transformer by its equivalent at
the other side is known as
referring the first side of
transformer to the second side.
20
Example 2-1.
A single-phase power system consists of a 480-V 60-Hz generator supplying a load
Zload = 4 +j3 Ω through a transmission line of impedance Zline = 0.18+ j0.24 Ω. Answer
the following questions about this system.
21
(a)
22
(b)
Zeq
23
2. Eliminate transformer T1 by referring the transmission line's elements and
the equivalent load at the transmission line's voltage over to the source side.
Zeq
or 24
Real Single Phase Transformer
• Primary connected to an
AC source and secondary
is open circuited
25
The Magnetization Current in Real
Transformer
• When AC power is connected to the transformer a
current flows even when secondary is open circuited.
26
The Magnetization Current in Real
Transformer
• When an ac power source is connected to a
transformer, a current flows in its primary circuit, even
when the secondary circuit is open circuited.
• It consists of two components:
27
The magnetization curve of the
transformer core
28
The magnetization current
29
The core-loss current in a transformer
7
im
32
The Total No Load (Excitation) Current in Real Transformer
34
The Voltage Ratio Across a Real
Transformer
From these equations it is obvious that:
36
The Current Ratio & Dot Convention
• Connect a load on the secondary side of the transformer.
• A current flowing into the dotted end of the transformer
produces a positive mmf.
37
The Current Ratio & Dot Convention
• A current flowing into the dotted end produces +ve mmf, while a
current flowing into the undotted end produce a –ve mmf.
39
The Equivalent Circuit of a Transformer
The losses that occur in real transformers have to be accounted for in
any accurate model of transformer behavior. The major losses are:
1. Copper Losses( I2R): The resistive heating losses in the primary
and secondary winding of the transformer. They are proportional
to the square of the current in the winding.
2. Eddy Current Losses: These are resistive heating losses in the
core and are proportional to the square of the voltage applied to
the transformer.
3. Hysteresis losses: These are associated with the rearrangement
of the magnetic domains in the core during each half cycle and
are nonlinear function of applied voltage.
4. Leakage Flux(φLP φLS): The fluxes which escape the core and
pass only through one of the transformer winding. These
escaped fluxes produce a self inductance in the primary and
secondary coil.
4
The Exact Equivalent Circuit Model
1.Copper Losses
The resistive copper losses are modeled by placing a
resistance RP in the primary and RS in the secondary winding
of the transformer.
41
The Exact Equivalent Circuit Model
2. Leakage Flux: The flux which escapes the core and passes only
through one of the transformer winding.
Primary coil Secondary coil
43
The Exact Equivalent Circuit Model
3. (Eddy Current +Hysteresis Losses): The core loss current, ih+e, is
proportional to voltage applied to the core and is in phase with voltage.
Therefore, can be modeled by Rc across primary.
4. The Magnetization Current: Is proportional to the voltage applied to the
core (in unsaturated region) and is lagging the applied voltage by 90o.
So it can be modeled by a reactance connected across the winding,
represented by XM.
44
The Exact Equivalent Circuit Model
The XM & RC represent the excitation effect which includes the core
loss current (eddy + hysteresis) and the magnetization current.
The XM & RC are placed inside, after LP and RP, because the voltage
applied to the core is input voltage less the internal voltage drop of the
winding.
4
Equivalent Circuit of a Real Transformer
• To analyze practical circuits containing transformers, it is
important to convert the entire circuit to a single voltage level.
• Therefore, the circuit must be referred either to primary or to its
secondary side.
46
Equivalent Circuit of a Real Transformer
49
???
50