Professional Documents
Culture Documents
Presentation F10
Presentation F10
Username:A
Username: A
COMMAND>
Username: A
COMMAND> SH
SHOW object>
(MORE HELP EXISTS - USE ARROW KEYS) NEXT->
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
REF CLK SOURCE : EXT CLK C16T2 REF CLK SPEED : 256k
COMMAND> SH
SHOW object> N
SHOW object>
PSU 1 PSU 2
SHOW object> N
COMMAND> SH S
COMMAND>
COMMAND> SH S
COMMAND> SH TOPOLOGY
COMMAND>
Scroll for further topology information
COMMAND> SH SOFT
COMMAND> SH USER
COMMAND>
Password:
COMMAND> ALARMS
ALARMS command>
(MORE HELP EXISTS - USE ARROW KEYS) NEXT->
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
Password:
COMMAND> ALARMS
ALARMS command>
<-PREVIOUS (MORE HELP EXISTS - USE ARROW KEYS)
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
COMMAND> ALARMS
COMMAND> CLEAR
CLEAR statistic or object>
When connecting two channels or ports the following criteria must hold:
1. Neither of the channels are already connected
2. Both channels are using the same protocol
3. The originating channel is configured as originate or bothway
4. The destination channel is configured as answer or bothway
5. There is sufficient capacity for the call to take place
INFO card> C9
INFO card> C5
INFO card>
INSTALL Cx [n]
INSTALL Cx card-type [n]
- installs and initializes card x
- For PT card installs, n = PT or Packet Node Number
INSTALL CxEyCz card-type
- installs and initializes card z on a
node extender.
INSTALL CxPSy-z or CxPVy-z
- install PT card ports using inclusive range of y to z
If the card is physically present, the card type
need not be specified, as it will be read from
the card itself.
Install spans the network; e.g. to install a
card at a remote node, use INS NxCx.
INFO card> C5
COMMAND> INSTALL
INSTALL card or port>
REMOVE Cx
- removes and deactivates card x
REMOVE CxEyCz
- removes and deactivates card on Node Extender
COMMAND> INSTALL
COMMAND> REMOVE
REMOVE card>
COMMAND> REMOVE
COMMAND> RESET
RESET node,card or remote shelf>
COMMAND> RESET
COMMAND> SET
SET object>
(MORE HELP EXISTS - USE ARROW KEYS) NEXT->
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
COMMAND> SET
SET object> C5P2
SET C5P2 parameter>
(MORE HELP EXISTS - USE ARROW KEYS) NEXT->
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
COMMAND> SET
SET object> C5P2
SET C5P2 parameter>
<-PREVIOUS (MORE HELP EXISTS - USE ARROW KEYS)
Alt-Z for Help │ ANSI-BBS │ 9600∙N81 FDX │ │ │ │ Offline
LOOPBACKS : NONE
EIA DCD : ON
EIA DSR : ON
IN BUFF : AUTO EIA CTS : ON
OUT BUFF : AUTO EIA CI : ON