Professional Documents
Culture Documents
F.E.B.E.M Assignment 1: Submitted by Nishant Gupta (183100070)
F.E.B.E.M Assignment 1: Submitted by Nishant Gupta (183100070)
M ASSIGNMENT 1
Submitted by Nishant Gupta(183100070)
PROBLEM STATEMENT 1
• In the given figure circular thin plate subjected to uniform pressure and simply
supported on boundary is shown in figure. We are interested to find out the
Stress variation and Displacement variation inside the plate. Also we have to
found the Maximum stress and displacement .The Material Properties are Steel
with E=200GPa and µ=0.3 p=0.2Mpa Radius of plate(a) is 20cm and
thickness(h) is 0.5cm.
r=a
F.E.M ANALYSIS
LATERAL
LONGIT
TORSIONAL
RESULTS
AMPLITUDE VS DISPLACEMENT
PROBLEM STAEMENT 3
A beam of length 6 m with hinge and roller support is shown in the
figure below is suspended to various loads. We have to calculate
Shear Force and Bending Stresses at various sections.
Beam material is steel with E=200GPa and beam has I cross
section
RESULTS
SHEAR FORCES
RESULTS
BENDING STRESSES