Professional Documents
Culture Documents
Quality Improvement in Technical Concerns
Quality Improvement in Technical Concerns
TOO
T
MEN
RVE
IMPO
LITY
QUA
N
SEVE
ENGINEERING MANAGEMENT
7QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
1
Quality Improvement falls in the major subject of Quality
Control and Management…
Quality Improvement:
//////////////////////////////////////////////////////////////
PRO
LOG ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
UE
2
Quality & Productivity Improvement
//////////////////////////////////////////////////////////////
PRO
LOG ENGINEERING MANAGEMENT
-John Ruskin
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
UE
3
Quality Improvement Requirements
• Organizational commitment
• Organizational culture
//////////////////////////////////////////////////////////////
Quality means
doing it Right when no one is looking...
PRO
LOG ENGINEERING MANAGEMENT
-Henry Ford
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
UE
4
Quality Management
Quality Plan
//////////////////////////////////////////////////////////////
PRO
LOG ENGINEERING MANAGEMENT
-Aristotle
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
UE
5
Quality Assurance
Quality Tool
//////////////////////////////////////////////////////////////
Professionalism means
consistency of Quality…
PRO
LOG ENGINEERING MANAGEMENT
-Frank Tyger
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
UE
6
Quality Improvement Methods-
D Do:
Implement corrective actions
Document procedures and observations
Using data-gathering tools to collect information
C Check:
Analyze information
Monitor trends
Compare obtained results with expected results
A Act:
Expected results: Do Nothing!
Not-Expected results: Repeat PDCA cycle
PDC
7
Document the process and revised plan
A- QC
MO ENGINEERING MANAGEMENT
//////////////////////////////////////////////////////////////
A-
MO ENGINEERING MANAGEMENT
-Philip Crosby
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
DEL
9
One of many methods to ease the quality improvement
process was introduced by Kaoru Ishikawa
7
solved using these seven tools
BASI The tools are designed for simplicity so average person can
C have less complicated statistical analysis
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
10
Seven Tools of Quality Improvement
7
BASI
C
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
11
Flow Chart
7
organization will be clarified.
6.
7.Furthermore, flow charts will show the duplicated effort and
BASI other non value added steps.
8.
C 9.So process owner can identify the target specific steps in
TOO order to make continuous improvement.
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
12
Flow Chart
DOCK
PAINT AND
AESTHETICS
RECIEVE
INSPECTION
7
BASI FINAL TEST ASSEMBLY
C
TOO
LS SHIPPING SUB-
7
INSPECTION
AND TESTING OPERATIONS
OF DOCK
QC
QUA ENGINEERING MANAGEMENT
7
6.
7.To help in identifying the causes, people used to take 5
potential factors which are man, machine, material,
BASI method, and environment as the guidance.
8.
C 9.Cause and effect diagrams consist of 2 sides. The right
TOO side lists the effect or the problem, while the left side lists
the causes of the problem.
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
14
Cause & Effect Diagram
7 RESULT
BASI
C
MEASUREMENTS MACHINES DESIGNS
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
15
Check Sheets
1.Check sheets are the paper forms for collecting data in real
time easily and concisely.
2.
3.According to the data on check sheets, frequency or
pattern of the events, problems, defects, etc. can be
observed.
4.
5.These data are then used as input data for other seven
7
quality tools such as histograms and Pareto diagrams.
6.
7.Furthermore, collected data on check sheets can be used
BASI as input to understand the real situation, analyze
occurring problem, control the process, make the
C decision, and develop planning.
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
16
Check Sheets
7
tool for summarizing and analyzing data.
6.
7.The particular values of histogram are:
BASI
• Summary graph of frequency distribution
C • Shows data in various ranges
TOO • Conveys symmetry
LS
OF
QUA ENGINEERING MANAGEMENT
7QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
18
Histogram Charts
7
BASI
C
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
19
Scatter Diagrams
7
can analyze the positive/negative correlation of 2 variables.
When the trend line goes from the bottom left to the up right,
it means those 2 variables have positive correlation.
BASI Otherwise, if the trend line goes from the up left to the
bottom right, and then it means those 2 variables have
C negative correlation.
TOO 6.
LS
OF
QUA ENGINEERING MANAGEMENT
7QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
20
Scatter Diagrams
7
BASI
C
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
21
Control Charts
7
6.
7.The value outside control area indicates that the process is no
longer stable because of some variation causes. Thus, this
BASI process needs proper corrective actions to eliminate the
sources of variation.
C 8.
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
22
Control Charts
7
BASI
C
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
23
Pareto Charts
7
5.As Dr. J. M. Juran said, 80% of the problems are caused by
20% of the potential sources.
6.
BASI 7.Not only to identify the major problem, pareto diagram can
also be used to analyze the improvement after solving some
C problems.
TOO 8.
9.Process owner can evaluate the process before and after
LS solving the problems.
OF
QUA ENGINEERING MANAGEMENT
7QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
24
Pareto Charts
100
90
80
70
60
50
40
7
30
20
BASI 10
0
C
TOO
LS
OF
QUA ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
LITY
25
Benefits
CO 6.
analysis. Pareto diagrams are effective for both areas.
LU
SI ENGINEERING MANAGEMENT
7QC
26
Persistence is the twin sister of excellence.
One is a matter of quality; the other, a matter of time…
AN
YO
TH
U
ENGINEERING MANAGEMENT
7 QC
QUALITY IMPROVEMENT IN TECHNICAL CONCERNS
27