Professional Documents
Culture Documents
Determining Call Processing Problems With Statistics
Determining Call Processing Problems With Statistics
with Statistics
David Zhang
Customer Support
Presented on 20 Dec. 2004
channel activation
acknowledge
Access_per_AGCH Immediate
Immediate assignment assignment command T3101 is started to
Wait for “establish
AGCH Indication” BSC
Layer 3 Initial Message
CM service request /
Paging Response
Layer 2
Establish indication SM SSM
SABM on assigned SDCCH Ok_acc_pro
(max. 6) CM service request c
Paging Response ms_access_by_type
UA on SDCCH channel T3101 expires, peg
Chan_req_ms_fail
No ok_acc_proc
MS power control is pegged Initial Layer
3 message Connection Request
CM service Sccp_tconn_est
request Conn_req_to_msc
Connection Confirm
Connection Refused
DTAP Message DTAP Message DTAP Message: Authentication request Conn_refused DTAP Message
DTAP Message DTAP Message
Authentication Response DTAP Message
classmark request
Classmark enquiry Request classmark
Classmark change update classmark Classmark update
Classmk_update_fail
cipher mode request
ciphering request
Ciphering mode command
Cipher_comp_ms Ciphering_successful
Ciphering mode complete Ciphering successful
Missing measurement Ciphering mode
Cipher_comp_ms
report No ciphering complete
timeout
Missing measurement Successful Ciphering_successful
Link_fail declared received
report expires
Error Indication RF_LOSSES_SD Cipher_mode_fail
Radio Channel Release
clear request
Clr_req_to_msc
DTAP: TMSI reallocation
DTAP: setup
DTAP: call proceeding
•RACH problem
•RACH => SDCCH Problem
•SDCCH Related Problem
•SDCCH => TCH Problem
•BTS related
•BSC related Problem
•MSC related
•MA_REQ_FROM_MSC = TOTAL_CALLS
Not SDCCH => TCH Problem
•MA_COMPLETE_FROM_MS = TOTAL_CALLS
NO BTS-BSC or BSC SM related Issue
•MA_CMD_TO_MS = TOTAL_CALLS
NO MS related problem if MA_FAIL_FROM_MS
=0
•MA_REQ_FROM_MSC > MA_CMD_TO_MS
TCH Queuing or blocking related problem =>
Check Known Issue Clarify etc =>CS web page =>
CP development web page
iir_mod 32 21000000h
iir_mod 34 1111301h
Hder: df 7 di 47c8 dm 4 tag 1000034a(CP_INT MT_RF_RES_IND_RCVD)
Mlen 21(deci): 4a f0 47 f1 2 15 e b 20 d 20 9 20 a 20 f 20 c 20 e
20
crm: crv_rf_res_ind_rcvd.c: Statistic IDLE_TCH_INTF_BAND0 updated: 10 in cell: 47h
# This indicates that there are 10 TCHs available in interference band 0 for this cell
…
Hder: df 7 di 4792 dm ab tag 8000349(CP_INT MT_CHAN_REQUIRED_RCVD)
channel_required.c: Statistic CHAN_REQ_CAUSE_ATMPT(cause: 4h) incremented for cell: 47h
Mlen 15(deci): 49 f0 47 f1 2 1 90 13 9c 13 98 11 3f ff 0
…
max_q_length_full_rate_channel = 4
queue_management_information = 4
Bssmap_t11 = 20000 > TCH_DELAY_MAX
SR1079168
Determining Call Processing problems with Statistics Analysis
Motorola Internal
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other
product or service names are the property of their respective owners. © Motorola, Inc. 2004.
Example 2_1: MA_CMD_TO_MS_BLKD with free TCH
max_q_length_full_rate_channel = 4
queue_management_information = 4
max_q_length_sdcch = 0
protect_last_ts = 1
Bssmap_t11 = 20000
max_q_length_full_rate_channel = 0
queue_management_information = 0
second_asgnmnt = 1
Determining Call Processing problems with Statistics Analysis
Motorola Internal
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other
product or service names are the property of their respective owners. © Motorola, Inc. 2004.
Example 3_1: MA_CMD_TO_MS_BLKD & Queue Timeout
queue_management_information = 0
max_q_length_full_rate_channel = 0
max_q_length_sdcch = 0
poor_initial_assignment = 0 at BTS
ext_range_cell = 0
second_asgnmnt = 1 at BSC
Hder: df 7 di 5f54 dm c3 tag 8000349(CP_INT MT_CHAN_REQUIRED_RCVD)
Mlen 15(deci): 49 f0 5f f1 6 1 90 13 81 4b ed 11 43 ff 0
# Look at the decode the TA is 66
Hder: df 7 di 5f0c dm 4 tag 10031e(CP_INT MT_ASSIGN_RES_REQ)
Mlen 39(deci): 1e f3 5f 15 20 f0 5f f1 7 18 43 b 4 1 8 91 1 0 0 0
7 5 33 19 81 60 14 ff 0 0 0 6 1 38 ff 0 ff 0
# TA is same as before which is 66 (43h) (count to number 11th)
crm: f_update_alloc_stats.c: Statistic ALLOC_TCH_FAIL incremented for cell: 5fh
crm: f_queue_request.c: Statistic TCH_Q_LENGTH updated for cell: 5fh Current queue length: 1
crm:crv_assign_res_req.c: Statistic CALLS_QUEUED incremented for cell: 5fh
# Since we don’t have extended range cell TCH so the call is moved to queue
# Also we don’t have MA_CMD_TO_MS then MA_FAIL_FROM_MS so Second assignment
# doesn’t start, bssmap_t11 started
rrsm: rrsm_trans_016.c: Statistic MA_CMD_TO_MS_BLKD incremented for cell: 5fh
Hder: df 7 di 5f29 dm 4 tag 10031f(CP_INT MT_REMOVE_FROM_QUEUE_TO_CRM)
Mlen 9(deci): 1f f3 5f 15 20 b 1 ff 14
crm: crv_rm_from_queue.c: Statistic TCH_Q_LENGTH updated for cell: 5fh, Current queue length = 0h
# bssmap_t11 timeout caused MA_CMD_TO_MS_BLKD pegging
Chan_req_ms_fail
No ok_acc_proc
MS power control is pegged Initial Layer
3 message Connection Request
CM service Sccp_tconn_est
request Conn_req_to_msc
Connection Confirm
Connection Refused
DTAP Message DTAP Message DTAP Message: Authentication request Conn_refused DTAP Message
DTAP Message DTAP Message
Authentication Response DTAP Message
classmark request
Classmark enquiry Request classmark
Classmark change update classmark Classmark update
Classmk_update_fail
cipher mode request
ciphering request
Ciphering mode command
Cipher_comp_ms Ciphering_successful
Ciphering mode complete Ciphering successful
Missing measurement Ciphering mode
Cipher_comp_ms
report No ciphering complete
timeout
Missing measurement Successful Ciphering_successful
Link_fail declared received
report expires
Error Indication RF_LOSSES_SD Cipher_mode_fail
Radio Channel Release
clear request
Clr_req_to_msc
DTAP: TMSI reallocation
DTAP: setup
DTAP: call proceeding
15:00:00 6915 0 0 0
16:00:00 6915 0 9 0
20:00:00 6915 2 94 2
21:00:00 6915 0 2 0
…
crm: f_calculate_ho_power.c : HO Power Level: (In dBm)
: TxMs :Gamma :PwrMs : NCell : Box : Ord : OrdPL : DBoff
LCI : 46 : 33 : 25 : 33 : -71 : -49 : -3 : 19 : 0
Hder: df 7 di 2d1a dm 5 tag 400311(CP_INT MT_INTERN_HANDO_REQ)
Mlen 81(deci): 11 f3 13 43 41 f0 13 c4 c 23 0 2b 0 b 3 3 1 0 0 0
0 0 0 a 9 2 f9 a6 a2 e7 cf eb c 0 0 0 0 0 0 0 0 0 0 7 5
33 58 81 60 14 2 0 5c 3 7 6 1 38 ff 0 0 ff 0 ff 0 ff 0 0 0 0
0 0 0 0 0 ff 0 ff 0 ff 0
# Another SDCCH Handover
crm: f_set_ms_freq_band.c: ms_freq_band(11h),cell_id(2dh),freq_band(0h), rev_level(1h), e
gsm_bit(ffh)
crm: f_update_alloc_stats.c: Statistic ALLOC_TCH incremented for cell: 2dh
SR1072540/PR176091
channel activation
acknowledge
Access_per_AGCH Immediate
Immediate assignment assignment command T3101 is started to
Wait for “establish
AGCH Indication” BSC
Layer 3 Initial Message
CM service request /
Paging Response
Layer 2
Establish indication SM SSM
SABM on assigned SDCCH Ok_acc_pro
(max. 6) CM service request c
Paging Response ms_access_by_type
UA on SDCCH channel T3101 expires, peg
•ACCESS_PER_AGCH = OK_ACC_PROC
+ CHAN_REQ_MS_FAIL
•ALLOC_SDCCH = ACCESS_PER_AGCH
•CHAN_REQ_MS_BLKD = ALLOC_SDCCH_FAIL
•CHAN_REQ_CAUSE_ATMPT = ALLOC_SDCCH_FAIL
+ ALLOC_SDCCH
bssname sitename Expr1002 dt cellname cm_serv_req_call cm_serv_req_emerg cm_serv_req_sms page_response sms_init_on_sdcch total_calls