Professional Documents
Culture Documents
Newton'S Rings
Newton'S Rings
INTRODUCTION
The formation of Newton’s rings is an
important application of interference of
light wave from the opposite faces of a thin
film of variable thickness.
FORMATION OF NEWTON’S RINGS
A thin air film of increasing thickness in all
direction from one point can be easily obtained
by placing a plano-convex lens of large radius of
curvature on a plane glass plate.
When the air film is illuminated normally by monochromatic light the observed
interference fringes are circular concentric rings with centre as the point of
contact. The rings are circular since these are the loci of points of equal
optical film thickness. The rings gradually become narrower as their radii
increase.
CONDITION OF MINIMA:
2µt=nλ
RADIUS OF NEWTON’S DARK
RINGS
rn=sqrt (nλR/µ)………..(1)
RADIUS OF NEWTON’S BRIGHT
RINGS
rn=sqrt[{(n+1/2)λR}/µ ]…….(2)
Diameter of nth ring is given by
Dn=2rn
From eqn. (1),
D1=2sqrt(λR/µ)
D2=2sqrt(2λR/µ)
D3=2sqrt(3λR/µ)
The difference in the diameters of two nearest dark rings is
given by :
D2-D1 =2sqrt(λR/µ)[sqrt2-1]=0.414*2sqrt(λR/µ)
D3 – D2 = 2sqrt(λR / µ)[sqrt3-sqrt2]=0.318*2sqrt(λR / µ)
D4 -D3 = 2sqrt(λR/µ)[sqrt4-sqrt3]=0.268* 2sqrt(λR / µ)
Hence the rings gradually becomes narrower as their radii
increases .
It can also be shown that the bright rings also gradually
become narrower as their radii increases.
NEWTONS RING BY TRANSMITTED
LIGHT
Condition of maxima:
2µt=nλ
Condition of minima:
2µt=(n+1/2)λ
Difference between newton’s rings by reflected
light and transmitted light.
In the reflected system, there is a phase change of П
between the two reflected light rays while in the
transmitted system there is a phase change of 2П
between the two transmitted light rays .
Therefore the condition of maxima and minima are
opposite in two systems.
Hence the centre in the reflected system is dark while
in the transmitted system is bright.
DETERMINATION OF WAVELENGTH BY
METHOD OF NEWTON’S RINGS
From eqn.(1), diameter of nth dark ring is
Dn=2sqrt(nλR)
Dn2=4nλR
From eqn.(1), diameter of (n+m)th dark ring is
Dn+m2 = 4 (n+m) λR
D n+m 2-Dn2= 4mλR
λ=(D n+m 2-Dn2 )/4mR ………….(3)
Hence measuring ,
n,m, Dn , Dn+m and R , λ can be determined
experimentally.
EXPERIMENTAL SET UP