Professional Documents
Culture Documents
Project Review 5
Project Review 5
ENGINEERING KALIKIRI
DEPARTMENT OF ECE
MEDROBO
MEDICINE DELIVERING AND PATIENT PARAMETER MONITORING SYSTEM
PROJECT TEAM :
N . ARCHANA - 18KA1A0440
M . LOKESHWAR REDDY - 19KA5A0404
P . DINESH KUMAR - 18KA1A0412
CH . MADHURI - 19KA5A0410
S . REDDY SUDHA - 19KA5A0405
PROJECT GUIDE :
MRS . K . GANGA BHAVANI , M.TECH
ADHOC ASSISTANT PROFESSOR
DEPARTMENT OF ECE
Contents:
Introduction
Abstract
Existing System
Drawbacks in Existing System
Proposed System
Advantages
Applications
Conclusion
References
Introduction
Population in our country is increasing rapidly, with the
increase in the number of people comes the proper
management of service. A place like hospital needs 24 by 7
surveillance. Inadequate staff members, negligence of nurses
can cause big risk to patients life. If automation is brought to
healthcare center then it will be far effective.
Poor quality health care not only increases the mortality rate
but also leads to unnecessary suffering and persistent
symptoms. Efforts have been made to enhance these conditions
with the use of computerization and robots to replace nurses yet
they are to reach out the masses and most of them are not
efficient enough to provide effective care to patients.
Drawbacks in existing system
By using the reference parameters which are given to the system, will compare
with the measured parameters. Then the recorded parameters data will be sent to
the doctors through the IOT platform when RFID Reader reads the tag which
stores the patient details.
The movement and finding the path to patient location is done through
Bluetooth. Also can reevaluate and view the data of individual patients after a
particular interval of time to make sure that all those patients suffering from
disease are feeling better and are in good condition.
BLOCK DIAGRAM
Power
12V Battery
Supply
RFID Tags
RFID Reader GSM/GPRS
Heartbeat Module DC
Sensor Motor
Arduino Motor
Temperature Mega Driver
Sensor DC
Bluetooth Motor
ADVANTAGES