Professional Documents
Culture Documents
Clipsal C-Bus: The Standard in Asia For Lighting Control
Clipsal C-Bus: The Standard in Asia For Lighting Control
Presented By:
Jeffery Tsui
Marketing Manager
Clipsal Integrated Systems (HK) Limited
4. Summary
Distributed Intelligence
•Each module is an intelligent unit, consisting of a
microprocessor, non volatile memory and resident software.
•Every device has a unique physical address.
•Each module is individually programmable over the C-Bus
network.
•Each module is individually identifiable over the C-Bus
network.
Modules Connection
•Each module is connected to the C-Bus network in parallel via an
unshielded twisted pair cable.
•The cable supplies 36vdc to C-Bus modules to operate and provides
a medium for data transfer between C-Bus modules.
Circuit Control Load
Protection Input Units
e.g. Key Switch, PIR,
Light Level Sensor
C-Bus
Neutral
110V/ 220V
Active
Active
PRESS
One-way switch:
L
Contact
One-way switch:
MCB
L Relay
Output
N
C-Bus
C-Bus
Circuit Switch Control Load
Protection
Two-way switch:
push
buttons
N
Increased
complexity in the
Circuit Control wiring of the Load
Protection power line.
Two-way switch:
MCB
L Relay
Output
N
C-Bus
Simplicity
C-Bus
Switch remains!
Just change
actuator.
Dimming: Simplicity
Dimmer remains!
MCB
L
N
C-Bus
C-Bus
Switch
C-Bus Communication
•The message is broadcast on the C-Bus for all units to read.
One-way switch:
MCB
L Relay
Output
N
C-Bus
Message ‘Switch
On Light’ is sent
C-Bus to the relay unit
Switch
Circuit Control Load
Protection
C-Bus Inputs
• Input modules are those which issue commands to the C-Bus network.
• Respond to certain stimuli, such as; touch, movement and temperature.
• C-bus input units are available in both British and American standards .
C-Bus Outputs
• Output modules are those which respond to commands issued
from input units to switch the electrical loads.
• Voltages – 220VAC (British), 110VAC (American).
• Dimmers and relays are available in many different configurations
depending on number of channels and rating of channels to suit
different application.
1. TOPOLOGY INDEPENDENT
2. CAMS
CHANGES
ADDITIONS
STAR
MOVES
ARE ALL SIMPLIFIED
3. MAINTENANCE IS SIMPLIFIED
DAISY CHAIN
TREE
PCI
C-Bus Network 4 CNI
C-Bus Network 4
PCI
C- Bus Network 3 CNI
C-Bus Network 3
PCI
C- Bus Network 2 CNI
C-Bus Network 2
PCI
C-Bus Network 1 CNI
C-Bus Network 1
1. Office floor 4 . .
01 02 03 04 CHANNEL . .
2. 8 loads over 2 relays RELAY
01 02 03 04
3. Add timing
4. Add local control
5. Add PIR 4
. .
05 06 07 08
CHANNEL . .
6. Add Light Level RELAY
Sensor 05 06 07 08
7. Interface to Building
Automation 07:30
8. No change in power
. . 5751 BUILDING
line
. . INFRASCAN AUTOMATION
SYSTEM
timer
01 02 05 06 PE CELL
03 04 07 08 07 08
Key Switches
Light
Infra-Red
220 V Remote Control
Distribution-Board
Key Switches
Light
Infra-Red
220 V Remote Control
C-bus Output Units
are located
in the
Output units distribution
are located board
Distribution-Board
in the load
itself.
Prepared By CIS Hong Kong
Slide 34
SUMMARY