Professional Documents
Culture Documents
Environmental Lab
Environmental Lab
Pipette
Stirrer
Take 1 lit of water sample in Now pipette out of 50 ml Hence all the jars on the
each 6 glass jar, make the alum solution and add it to platform of jar test
sample homogeneous by first jar. Hence increase the apparatus. Then put down
just stirring in each in each amount of dose by 5 ml in all paddles to a desired
subsequent jar. each subsequent jar. depth.
PROCEDURE :
Reduce Switch on Observe
• After reduce of the speed 25 • After complete of stirring, • Then observe the exact of
rpm and run it to 20 minutes. switch on the light and allow settlement in each jar.
the flocks produced to be settled
down for 30-45 minutes.
PROCEDURE :
If the with maximum dose
The amount of dose in jar If two jars have almost same gives maximum clarity
having maximum settlement removed, take least dose jar respect the test with high
is the desired value of test. for result. dose value with some
suitable increment .
PROCEDURE :
After performing the
test found that
Don’t forget to write SI
sedimentation by
no on the jar.
coagulation reagent no
jar.
CONCLUSION
AND
Maintain the speed Do not switch off the
properly. machine while stirring PRECAUTION :
is going on.
THANK YOU ALL