Professional Documents
Culture Documents
Final PPT Capstone
Final PPT Capstone
SYSTEM
Water is the basic need for the existence of life on earth. In spite of 70%
water on earth majority of water is not suitable for drinking purpose.
There is a huge demand of clean water as it is used for a variety of
purpose such as drinking, bathing, cleaning, cooking etc. Impurities
present in water can cause serious health issues that can damage the life
of human beings. The chief function of the automatic drainage system is
to collect, transport, as well as dispose the solid waste in the waste bucket
by the help of claws. Solid waste in drainage water includes empty
bottles, polythene bags, papers etc. Impurities in drainage water can lead
to blockage of the drainage system. In order to avoid such situation these
impurities are needed to be taken out time to time for the continuous flow
of drainage water. Drain can be cleaned continuously by the help of
model using the drive system to remove the solid waste and threw it into
waste bucket. This project is designed with the objective to initiate the
efficient working of system. This project automatically cleans the water
in the drainage system each time any impurity appears, and claws which
are driven by chain sprocket grasp the solid waste and threw it into the
waste bucket to avoid blockage. It even reduces the cost of manual labor
as well as reduces the threat to human life.
Advantages
⮚ Finalizing Mechanisms
⮚ Project Design
⮚ Parts Procurement
⮚ Parts Fabrication
⮚ Project Assembly
⮚ Testing
Finalizing Mechanisms
Step 1: Make a list of required hardware outputs
Step 2: Examine the mechanism architecture
Step 3: Select the architecture
Step 4: Identify Motion Needs
Step 5: Start searching for mechanisms & Parts
Step 6: Examine Costs and Power Constraints. ...
Step 7: Check part availability
Step 8: Calculate Sizes
Step 9: Fabricate parts
Project Design
Mechanical Design or Machine Design is one of the important branches of
Engineering Design. To understand what exactly machine design or
mechanical design is let us consider the example of the gear box of the car.
The gear box transmits the motion and the power of the engine to the wheels
of the vehicle. The gearbox comprises group of gears which are subjected to
not only motion but also the load of the vehicle. For the gears to run at
desired speeds and take desired loads it is important that they should be
designed.
Parts Procurement
Mechanical parts can be procured from local stores or online through other stores
Parts Fabrication
It is a value added process that involves the creation of machines, parts, and
structures from various raw materials. A fabrication shop will bid on a job,
usually based on the engineering drawings, and if awarded the contract will
build the product.
Fabrication Processes:
• Turning • Welding
• Boring • Drilling
• Threading • Metal Cutting
• Cutting • Threading
Project Assembly
Motor AC DC
DC motors were the first type widely used, since they could be powered from existing direct-current
lighting power distribution systems. A DC motor's speed can be controlled over a wide range, using
either a variable supply voltage or by changing the strength of current in its field windings.
Shafts / Axle
An axle is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be
fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating
around the axle.[1] In the former case, bearings or bushings are provided at the mounting
points where the axle is supported. In the latter case, a bearing or bushing sits inside a central
hole in the wheel to allow the wheel or gear to rotate around the axle. Sometimes, especially
on bicycles, the latter type axle is referred to as a spindle.
2.We can change the shape and type of jaw according to locality
drain requirements
3.The thread we have used to join the chain and collector jaw can
be changed with floss wire or carbon fibre for better strength
THANK YOU