Professional Documents
Culture Documents
Laser Beam Machining AMP - 07
Laser Beam Machining AMP - 07
BY S.PREMKUMAR
The ruby crystal is thus simulated and this produces highly spatial laser beam. When the rays hit the work surface it causes partial or complete vaporization of surface material.
Design Consideration
Non-reflective workpiece surfaces are preferable Sharp corners are difficult to produce; deep cuts produce tapers Consider the effects of high temperature on the workpiece material
CHARACTERISTICS
Laser Beam Machining (LBM) is thermal processes considering the mechanisms of material removal. Laser Beam Machining or more broadly laser material processing deals with machining and material processing like heat treatment, alloying, cladding, sheet metal bending. Laser stands for light amplification by stimulated emission of radiation. As laser interacts with the material, the energy of the photon is absorbed by the work material leading to rapid substantial rise in local temperature. This in turn results in melting and vaporisation of the work material and finally material removal.
Similarly as can be seen in Fig. 9.6.1, laser beams can be focused over a spot size of 10 100 m with a power density as high as 1 MW/mm2. Electrical discharge typically provides even higher power density with smaller spot size. EBM and LBM are typically used with higher power density to machine materials. The mechanism of material removal is primarily by melting and rapid vaporisation due to intense heating by the electrons and laser beam respectively.
VERSATILITY
Laser can be used in wide range of manufacturing applications Material removal drilling, cutting and tre-panning Welding Cladding Alloying Drilling micro-sized holes using laser in difficult to machine materials is the most dominant application in industry. In laser drilling the laser beam is focused over the desired spot size. For thin sheets pulse laser can be used. For thicker ones continuous laser may be used.
4 Typical application
Material removal-Cutting Welding Cladding Soldering
Laser Cladding
A method of depositing material by which a powdered or wire feedstock material is melted and consolidated by use of a laser in order to coat part of a substrate or fabricate a near-net shape part. It is often used to improve mechanical properties or increase corrosion resistance, repair worn out parts, and fabricate metal matrix composites. The powder used in laser cladding is normally of a metallic nature, and is injected into the system by either coaxial or lateral nozzles.
Laser Soldering
A technique where a laser is used to melt and solder an electrical connection joint. Diode laser systems based on semiconductor junctions are used for this purpose. The beam is delivered via an optical fiber to the workpiece, with fiber Since the beam out of the end of the fiber diverges rapidly, lenses are used to create a suitable spot size on the workpiece at a suitable working distance. A wire feeder is used to supply solder.
CHARACTERISTICS
Material removal technique:
Heating,Melting and Vaporisation.
Work material: All materials except those having high thermal conductivity and high reflectivity. Tool:
Laser beam in wavelength range of 0.3 to 0.6m.
Power density:
Max 107 W/mm2.
from group D .