Professional Documents
Culture Documents
Properties FCD 50
Properties FCD 50
Standar ISO
1083:1987
Minimum Minimum 0.2% Minimum Impact on Charpy Approximate
Grade tensile strength proof strength elongation V-notch, J hardness Matrix Sugested method
2 2
N/mm N/mm % Average Individual HB structure of Production
900/2 900 600 2 302 - 359 Tempered Quenched and
martensite tempered
800/2 800 480 2 248 - 352 Pearlite Normalised
700/2 700 420 2 229 - 302 Pearlite
600/3 600 370 3 192 - 269 Pearlite
500/7 500 320 7 170 - 241 Pearlite & Heattreatment
Ferrite or
450/10 450 320 10 160 - 221 Pearlite & As-cast
Ferrite
400/18 400 250 18 14 11* <179 Ferrite
350/22 350 220 22 17 14* <160 Ferrite
400/18L 400 250 18 12 9** <179 Ferrite Annealed
350/22L 350 220 22 12 9*** <160 Ferrite
* Impact at room temperature
o
** Impact at -20 C
o
*** Impact at -40 C
Standar DIN 1693
(Okt.1973)
Sifat Mekanik diuji pada Benda Uji yang dicor terpisah *)
Nomor Mampu 0.2% Elongasi Ketahanan Impak
Kelas Material Tarik offset rata-rata tunggal Sruktur mikro
2 2
N/mm N/mm % J J
GGG-40 0.7040 400 250 15 Feritik
GGG-50 0.7050 500 320 7 Ferit/Perlit
GGG-60 0.7060 600 380 3 Perlit/Ferit
GGG-70 0.7070 700 440 2 Perlitik
GGG-80 0.7080 800 500 2 Perlit
o o
GGG-35.3 0.7033 350 220 22 14 pd -40 C 11 pd -40 C
o o
GGG-40.3 0.7043 400 250 18 14 pd -20 C 11 pd -20 C
*) Terutama untuk tebal Coran diatas 50 mm dan Coran masif, dianjurkan adanya kesepakatan
antara Produsen dan Konsumen; lihat DIN 1693 Bagian 3.
Standar JIS G 5502
Kelas Nama Batas mulur 0,2 % Kuat tarik Elongasi Kekerasan
[Kg/mm2] [Kg/mm2] [%] [HB]