The sliding bevel is a tool composed of two parts, a rosewood stock and a hardened steel blade, that allows a user to mark angles on wood. To use it, the user loosens the lock on the stock, adjusts the blade to the desired angle, tightens the lock, and uses the bevel to mark a line at the correct angle which can then be cut with a saw.
The sliding bevel is a tool composed of two parts, a rosewood stock and a hardened steel blade, that allows a user to mark angles on wood. To use it, the user loosens the lock on the stock, adjusts the blade to the desired angle, tightens the lock, and uses the bevel to mark a line at the correct angle which can then be cut with a saw.
The sliding bevel is a tool composed of two parts, a rosewood stock and a hardened steel blade, that allows a user to mark angles on wood. To use it, the user loosens the lock on the stock, adjusts the blade to the desired angle, tightens the lock, and uses the bevel to mark a line at the correct angle which can then be cut with a saw.
The sliding bevel is a tool composed of two parts, a rosewood stock and a hardened steel blade, that allows a user to mark angles on wood. To use it, the user loosens the lock on the stock, adjusts the blade to the desired angle, tightens the lock, and uses the bevel to mark a line at the correct angle which can then be cut with a saw.
parts, the stock and the blade. The stock is usually made from rosewood which is a high quality material. The blade is made from hardened and tempered steel. • The sliding bevel is composed of two parts, the stock and the blade. The stock is usually made from rosewood which is a high quality material. The blade is made from hardened and tempered steel. Using the Sliding Bevel • 1. The stock of the sliding bevel is held firmly against the wood and the lock is loosened allowing the angle of the blade to be altered. • 2. The lock on the sliding bevel is tightened so that the angle of the blade cannot be altered accidentally. A marking knife is used to mark a line at the correct angle. • 3. The wood is cut to the correct angle using a saw/fretsaw or appropriate tool. Using the Sliding bevel