The document provides instructions for producing liquid soap through a multi-step chemical process. Key reagents include CMC, sulphonic acid, caustic soda, soda ash, colorant, perfume, Texapon, and SLS. The process involves soaking CMC, dissolving and adding other reagents in sequence, waiting for the lather to disappear before adding color and perfume, and packaging the finished liquid soap for distribution to potential markets like schools.
The document provides instructions for producing liquid soap through a multi-step chemical process. Key reagents include CMC, sulphonic acid, caustic soda, soda ash, colorant, perfume, Texapon, and SLS. The process involves soaking CMC, dissolving and adding other reagents in sequence, waiting for the lather to disappear before adding color and perfume, and packaging the finished liquid soap for distribution to potential markets like schools.
The document provides instructions for producing liquid soap through a multi-step chemical process. Key reagents include CMC, sulphonic acid, caustic soda, soda ash, colorant, perfume, Texapon, and SLS. The process involves soaking CMC, dissolving and adding other reagents in sequence, waiting for the lather to disappear before adding color and perfume, and packaging the finished liquid soap for distribution to potential markets like schools.
The document provides instructions for producing liquid soap through a multi-step chemical process. Key reagents include CMC, sulphonic acid, caustic soda, soda ash, colorant, perfume, Texapon, and SLS. The process involves soaking CMC, dissolving and adding other reagents in sequence, waiting for the lather to disappear before adding color and perfume, and packaging the finished liquid soap for distribution to potential markets like schools.
Reagents: 1.CMC (PacR, or Antisol) – 1/4 kg 2. Sulphonic Acid – 1 litres 3. Caustic Soda – 1/4 kg Liquid Soap Production:…
4.Soda Ash – 1/4 kg
5. Color (Green) 6. Perfume [Lemon fragrance of any of your choice] 7. Texapon – 1/4 kg 8. SLS [Soduim Laurel Sulphate] – 1/4 kg 9. Foam Booster Steps:
1. Soak ¼ kg of Antisol or PAC-R or CMC in 10
litres of water for 2-3 days. Note this must properly dissolve and look like Akamu or Starch before you begin production. 2. Dissolve 1/4 kg of Soda Ash in water and pour into CMC. Stir until reaction is done 3. Dissolve SLS in water to give clear solutuon. Pour into CMC and stir. Steps…
4. Dissolve 1/4 kg Texapon and pour into mixture
above 5. Pour 1 litre of sulphonic acid into CMC and stir 6. Dissolve Caustic soda in water and stir properly. Pour in above mixture 7. Add your foam booster and stir well. 8. Wait for Lather to disappear, then add color and perfume to taste. Congratulations!
If you followed this step rightly, then your liquid
soap should be ready for packaging and distribution. A little problem however, should be a market to sell your products. But you can start by distributing to schools around you. ….
Today, many schools are opening up.
You can do a market survey and get a franchise to be a sole distributor to on or many of such schools. Also, clinics, churches etc are a good place to visit.