Professional Documents
Culture Documents
Introduction
Introduction
Lesson 1 Introduction
by Jerome Schubert
TAMU-Petroleum Engineering Fall, 2004
1. Introduction
Slide 1 of 16
Lesson 1 - Introduction
Texts Grading Syllabus (on internet) Schedule Class Objectives (on internet) Corrections to Textbook (on internet)
http://pumpjack.tamu.edu/~Schubert/
General Information
Approval of instructor
Class Room:
Rich 302
1. Introduction
Slide 3 of 16
General Information
Instructors:
Jerome J. Schubert
1. Introduction
schubert@spindletop.tamu.edu jschubert@tamu.edu
Pete 661 Drilling Engineering Slide 4 of 16
Textbook
Applied Drilling Engineering, by Adam T. Bourgoyne Jr., Martin E. Chenevert, Keith K. Millheim and F.S. Young Jr., Society of Petroleum Engineers, Richardson, TX, 1991.
1. Introduction
Slide 5 of 16
References
Advanced Well Control Manual, by David Watson, Terry Brittenham and Preston Moore. SPE Textbook Series, 2002. Floating Drilling: Equipment and its Use, Practical Drilling Technology, Vol.2, by Riley Sheffield, Gulf Publishing Company, Houston, TX, 1980. IADC Deepwater Well Control Guidelines, Published by the International Association of Drilling Contractors, Houston, TX, 1998. An Introduction to Marine Drilling, by Malcolm Maclachlan. Daytons Oilfield Publications Limited, P. O. Box 11, Ledbury, Herefordshire HR8 1BN, England, 1987.
Pete 661 Drilling Engineering Slide 6 of 16
1. Introduction
References - contd
Drilling Engineering, A complete Well Planning Approach, by Neal Adams and Tommie Carrier. PennWell Publishing Company, Tulsa, OK, 1985 Practical Well Planning and Drilling Manual, by Steve Devereux. PennWell Publishing Company, Tulsa, OK, 1998. Underbalanced Drilling Manual, Gas Research Institute, GRI, Chicago, 1997. Air and Gas Drilling Manual, by William C. Lyons, Bayum Guo, and Frank A. Seidel, McGraw-Hill, New York, 2001.
1. Introduction
Slide 7 of 16
1. Introduction
Slide 8 of 16
Homework Assignment:
Read:
1. Introduction
1. Introduction
Slide 10 of 16
1. Introduction, the Rotary Drilling Process, The Rig, Drilling Equipment, Drilling Fluids 2. Drilling Problems, Wellbore Hydraulics, Pressure Drop Calculations 3. Casing Design Procedures, Burst, Collapse, Tension 4. Abnormal Pore Pressure Prediction, Fracture Gradients
1. Introduction Pete 661 Drilling Engineering Slide 11 of 16
Schedule - contd
WEEK NO. TOPICS
5. Abnormal Pressure, Well Control 6. SPE ATC&E 7. Well Control, contd, Kick Tolerance 8. Cements and Cementing, Primary & Secondary Cementing 9. Squeeze Operations, Cement Plugs
1. Introduction
Slide 12 of 16
Schedule - contd
WEEK NO.
10. 11.
TOPICS
12.
Directional Drilling, Wellbore Surveying Techniques Horizontal Drilling Technology, Coiled Tubing Drilling, Buckling, Torque and Drag Offshore Drilling
1. Introduction
Slide 13 of 16
Schedule - contd
WEEK NO. TOPICS
13. Deep-Water Drilling, Dual-Gradient Drilling 14. Underbalanced Drilling 15. Underbalanced Drilling, FINALS
1. Introduction Pete 661 Drilling Engineering Slide 14 of 16
Important Dates
QUIZ A - Thursday, Oct. 7, 6:30-8:30 p.m. QUIZ B - Thursday, Nov. 11, 6:30-8:30 p.m.
Both in Rich 302
Design Projects Due: Monday, Dec. 6, 5 p.m. (Rich 501K) FINALS Monday, Dec 13, 8:00 10:00 a.m.
Pete 661 Drilling Engineering Slide 15 of 16
1. Introduction
1. Introduction
Slide 16 of 16
Technomedia International
To gain access and to see what the lessons look like: Open your Microsoft Internet Explorer go to the Technomedia website: http://ils.techno-media.com/ Login ID: AMPILOT Password: texas
Click on tab: Click on: Click on: Click on: Click on:
All Courses Register for the Lesson you want to see for example: Sucker Rod Pumping, Volume 1 View registered courses Start Wrench or other options to the left of the screen
1. Introduction
Slide 17 of 16
Additional Lessons
Technomedia would like feedback regarding problems, comments, possible improvements, etc.
1. Introduction
Slide 18 of 16