Department of Electrical and Electronics Engineering: Course: Course Code

You might also like

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 11

Department of Electrical and Electronics Engineering

Course : Mini Project


Course Code: 19EE607

Title: Boost Converter (12V-24V)


Guide Name : Mr. Pradeep
Kumar
Project teammates
Godwin D’Souza
Byregowda GM
Kiran U
Abhishek M 4nm19ee002

Department of Electrical and Electronics Engineering


TRIGGERING CIRCUIT DESIGN
 Using 555 timer based triggering circuit of the boost converter.

 With the variable pulse width modulation.

 The variable PWM achieved by using two diodes and potentiometer to 555 base astable multivibrator.

Kiran U
Abhishek M

2
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Design
T-on calculation ;

The switching frequency f=20kHz.


The total time period =50uS
For 50% of duty cycle the T-on=25uS.
T-on=0.693x(Ra + Rb)x C.

Let Ra=10kohm, Choosing Pot of 47kohm,at pot position of 50% also the diode
resistance taken consideration so Rb=25kohm

25uS=0.693x(10+25)k x C
Value approximately of comes out to be 1000pF.

3
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Simulation output

4
Seminar
20/08/22 Department of Electrical and Electronics Engineering
L&C Design for Boost converter

Inductor Calculation; Capacitance Calulation;

Power required 100W

Voltage=24V

Resistance ,P=V^2/R DeltaV/V=0.05.


R=5.76ohm
C=0.5/5.76*0.05*20k
D=0.5 C=86.9uF
f=20kHz
So Lmin=0.5(1-0.5)^2*5.76/2*20K
Lmin=18uH
L=1.25*Lmin
L=22.5uH

5
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Boost converter circuit

6
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Circuit diagram

7
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Total circuit simulation

8
Seminar
20/08/22 Department of Electrical and Electronics Engineering
With gate circuit protection

9
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Result
The triggering circuit is designed for desired frequency and simulation result is obtained.

Inductor and capacitance values are calculated and simulated.

10
Seminar
20/08/22 Department of Electrical and Electronics Engineering
Thank You

11
Seminar
20/08/22 Department of Electrical and Electronics Engineering

You might also like