Professional Documents
Culture Documents
IMS-ZXUN CG-BC-EN-Installation and Commissioning-Data Configuration and System Debugging (Data Configuration) - 1-201010-PPT-44new
IMS-ZXUN CG-BC-EN-Installation and Commissioning-Data Configuration and System Debugging (Data Configuration) - 1-201010-PPT-44new
Targets
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Network Architecture
CG Server
The Charging Gateway (CG) Server is composed
of dual blade servers and a disk array.
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Adding a Realm
Enter a realm name and press F5 to execute the
command.
Adding a Host
Double-click IMS Configuration > Collector Interface >
Rf Collector > Local Host Name > Create Host(ADD
HOST) on the left pane of the MML Terminal view
Adding an SCTP Link
Parameter Explanation
SCTP Link ID It should be different from any existing ID.
Parameter Explanation
Diameter Link ID A user-defined diameter link ID
Local Host Enter the host name that has been created. ccf.zte.com.cn
or ccf.chinamobile.com.cn is recommended.
Local Realm Enter the realm name that has been created. zte.com.cn or
chinamobile.com.cn is recommended.
Remote Host Remote NE+office number+realm name. For example,
zte.com.cn or chinamobile. com.cn
SCTP/TCP link ID Node ID of SCTP or TCP link.
Setting CDR Construction Parameters
Output timeout interval (m): When the service is not terminated, the
interval to generate a CDR file.
CDR construct mode: If PART is selected, then when the time set in
Output timeout interval (m) expires, a CDR file is generated. If FULL
is selected, then a complete CDR file is generated when the service is
terminated.
Viewing CDR Construction Parameters
Double-click IMS Configuration > CDR Process > CDR Construct
Parameter > Show CDR Construct Parameter (SHOW
CDRCONSTRUCT) on the left pane of the MML Terminal view
Contents
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Viewing CDR Format
Double-click IMS Configuration > CDR Process > CDR Format >
Show CDR Formats in Use(SHOW IMSUSEDCDRFMT) on the left
pane of the MML Terminal view
Setting ASN.1 CDR Filtering
Parameter Explanation
CDR Type CDR type required to be filtered.
CDR Fields the name of the CDR field, separating different names with a comma.
The
CDR field names are case-sensitive.
Contents
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Setting IMS Channel Parameters
Adding an IMS Merging CDR Channel
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
CDR Sorting Objects
CDRs of NEs in the same core network are often
saved in one channel. However, some operators
want to sort CDRs, saving hot charging CDRs or
settlement CDRs to a specific channel. In this
case, CDR sorting objects are required.
CDR sorting objects include the following:
CDR construction
CDR merging
GTP' input
CDR Construction Pick
Adding a CDR Construction Pick Group
Double-click IMS Configuration > CDR Process > CDR Pick > CDR
Construct Pick > Create CDR Construct Pick Group(ADD
IMSCPICKGRP)
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Adding Local GTP‘ Configuration
Parameter Explanation
Parameter Explanation
GTP' In Node Enter the ID of GTP' input node
IP Address: Enter the IP address of the remote node.
Port Enter the port number of the remote node.
IP Protocol Enter the protocol type used by this GTP‘ node, such as TCP or UDP.
Default CDR ID of the default channel used to save CDR files of this GTP' node.
Channel ID
CDR Format CDR format of the default output channel of this GTP' node, which must
have been defined.
Viewing GTP' Input Node
Double-click IMS Configuration > Collector Interface > Ga Collector
> Show GTP'In Node(SHOW IMSGTPINNODE) on the left pane of
MML Terminal view.
Contents
Brief introduction
Protocol configuration
CDR format configuration
IMS channel configuration
CDR sorting configuration
Input interface configuration
Output interface configuration
Adding an FTP Server
Parameter Explanation
Server ID It should be different with any existing FTP
server ID.
Server IP IP address of FTP server
Server Port Port number of FTP server. By default, it is
21. It must be consistent with that on the remote end.
User Name The name of the user logging into FTP server.
Parameter Explanation
Server ID ID of the created FTP server.
Local Config ID Local configuration ID.
Local DIR the relative path storing CDR files on the charging server.
Remote DIR the directory to receive CDRs on the BD.
Post Transfer when the files are transferred, delete or remove the directory.
Process Type
Move to DIR if MOVETO option is selected for Post Transfer Process Type,
you
must enter the destination path to store the file.
Format of File supports the “*” and “?” wildcard.
Name
Adding a GTP' Output Group
Parameter Explanation
Local IP Local IP address of the Ga interface
Local Port Local port number of the Ga interface
GTP'Out It can be 0, 1, 2 and 3. Four GTP'
Group ID output groups are supported at most.
Enable Used to set if the echo message
Echo is sent from Ga interface.
Message
Echo Interval when the subsequent echo
Interval(s) message is sent from Ga interface.
Adding a GTP' Output Group
Parameter Explanation
Message Timeout(s) Timeout duration of GTP' message.
Max Retry Time Maximum times of resending GTP' message
until the message is received correctly.
Protocol The protocol type used by the GTP' output
group, TCP or UDP.
Load Share Sets if the output nodes in the same output
group share the load.
Adding a GTP' Output Source Channel
GTP'Out Group ID: A created GTP' output group.
Source Channel: The channel ID through which CDRs are output to
other CGs by GTP’.
Adding a GTP' Output Remote Node
GTP' Out Group ID: The created GTP' output group ID.
GTP' Out Node ID: The local GTP; output node ID.
Node IP: The IP address of the output destination node.
Node Port: The port number of the output destination node.
Node Priority: Local node priority. If there are multiple GTP' output
nodes, the CDRs are output to the node with the highest priority.