Professional Documents
Culture Documents
Theory of Centrifugal Casting & Effect of Thermophysical Property
Theory of Centrifugal Casting & Effect of Thermophysical Property
Theory of Centrifugal Casting & Effect of Thermophysical Property
On Centrifugal
Casting process
Acknowledgement
I would like to express my special thanks of gratitude to “HEL (Harsha
Engineers International Ltd.)” Who gave me the golden opportunity to do this
wonderful project of Numerical Analysis On Centrifugal Casting Process.
I would also like to thanks to my supervisor Mr. Devang Kiri (Manager at
HEIL) and Mr. C V Prajapati (Dy. General manager at HEIL) who made this work
possible.
I would also like to thanks my institute CSPIT- Mechanical engineering
(Chandubhai S Patel institute of technology) and my professor Dr. Dattatrey
Subedar for the continuous support through project.
All component of
Cast product
centrifugal casting process
Introduction
• Objective
• Tin-Bronze is a critical material for solidification process, But
combination of all process parameter are not expectable for
manufacturing defect-less product. Numerical analysis is help to decide
proper combination of all parameter and optimize the process.
• Scope
• Numerical technique is help to optimize the process parameter and
proper combination of all parameter. It will help to select the process
parameter and manufacture defect-less product.
Work progress
• G-factor theory:-
G.F =
Centrifugal force =
Gravitational force =
N=
• Suggested 50 – 100 G speed range for die cast (metal mold) and 25 – 50 G for
sand cast pots and shaped castings. Too high speed results in excessive stresses
and hot tears in outside surfaces.
Work progress
• Mold Design:-
Where:- = Stress
T = torque
P = available power
G = Shear modulus
L = length of mold
r = Inner radius of mold
R = Outer radius of mold
Work progress
• Thermal Property
Thermal Property
No. Name Value
1 Density (kg/m3) 8600
2 Viscosity (kg*s/m) 0.0176
3 Thermal conductivity (w/m k) 45
4 Specific heat ( J / kg k) 435
6 Molecular weight (Kg /K mol) 240.95
7 lattern Heat (J/Kg) 190000
8 Solidus temperature ( C ) 870
9 Liquidus Temperature ( C ) 1010
10 Pouring Rate (kg/s) 33.33
11 Pouring Temperature ( c ) 1150
12 Pre heat temperature ( c ) 270 - 300
• Geometrical Data
Geometrical Data
No Name Value
1 I.D of mold (mm) 300
2 O.D Of mold (mm) 450
3 Length of mold (mm) 1200
4 Angle of pouring (deg) 12
Month wise progress of work
Literature
Survey/Revi
ew/Updates
Formulation
of the
Problem
Results and
analysis
Publication
Report
Writing
Project Preliminaries
• NAME OF PROJECT:- THERORY OF CENTRIFUGAL CASTING &
EFFECT OF THERMOPHYSICAL -
PROPERTY
• COVERD TOPIC :-
» INTRODUCTION
» PHYSICS BEHIND CENTRIFUGAL CASTING
» TYPE OF DEFFECTS
» REASON FOR GENRATING DEFFECTS
» THERMAL EFFECT ON CENTRIFUGAL CASTING
» LITRATURE RIVEW
» REFRANCE