Professional Documents
Culture Documents
High Temperature Coatings
High Temperature Coatings
High Temperature Coatings
Primer :
. Recommended as primer coat Anti corosion primer for high termal /high temperature paint specialty for coating under insulation paint and
high corrosion in immersent atmosphere such us.
silicate
. Recommended as Anti corosion primer for high termal /high temperature paint specialty for coating under insulation paint.
. Recommended as primer coat, monocote or topcoat for for high termal /high temperature paint specialty for coating under insulation paint
Available for ambien curing or stoving curing in 30 minute 242’c or 60 minute 205 ‘ccc
Recomendec as monocooat for wide temperature coatings for -40 up 600 ‘c especialy for coatings under solution ..
ITEM STANDARD
a. High term 250 alu and colour
NV /SOLID CONTENT 34+/- 2
one component physically drying silicone acrylic coating. It is an
FLAST POINT 27 C
aluminium pigmented product. It is
GLOSSYNESS MATT
heat resistant up to 260 °C. Can be used as primer, mid coat or finish
DENSITY 1
coat in atmospheric environments.
VOC 580
Suitable for properly prepared carbon steel, galvanised steel, stainless SUBTRATE TEM 5
DRYING TIME 10 23 40 ‘C
steel and aluminium substrates. PERATURE
Colours SURFACE DRY 45 30 15 10 MINUTE
Aluminium and black DRY ON WALK 4 3 2 1 HOUR
Typical use Dry to over coat, 6 3 2 1 HOUR
minimum
Protective:
Designed as heat resistant coating. Suitable for insulated and non DRY FILM THICKNESS 20 -40UM
insulated surfaces. Recommended in WET FILM THICKNESS 60-120 UM
combination with an inorganic zinc silicate coating as primer, providing Theoretical spreading 17-8,5 M2/L
heat resistance up to 260 °C and long rate
corrosion protection.
PRODUCT DEVELOPMENT PLANNING.
D.High thermal/high temperature coatings
Top coat
ITEM STANDARD
B. High term 540 alu
NV /SOLID CONTENT 40+/- 2
one component physically drying silicone acrylic coating. It is an
FLAST POINT 26 C
aluminium pigmented product. It is heat resistant up to 600 °C. Can be
GLOSSYNESS MATT
used as primer, mid coat or finish coat in atmospheric environments.
DENSITY 1,14
Suitable for properly prepared carbon steel, galvanised steel, stainless
VOC 520
steel and aluminium substrates. SUBTRATE TEM 5
DRYING TIME 10 23 40 ‘C
Colours PERATURE
aluminium SURFACE DRY 60 45 30 15 MINUTE
DRY ON WALK 4 3 2 1,5 HOUR
Protective: Dry to over coat, 8 5 4 3 HOUR
Designed as a heat resistant coating. Suitable for insulated and non minimum
insulated surfaces. Recommended in
combination with an inorganic zinc silicate coating as primer, providing DRY FILM THICKNESS 20 -30UM
heat resistance up to 400 °C and long WET FILM THICKNESS 55-80 UM
term corrosion protection. For shorter periods, such a combined Theoretical spreading 20-13,3 M2/L
system can handle peak temperatures up to rate
540 °C
PRODUCT DEVELOPMENT PLANNING.
D.High thermal/high temperature coatings
Top coat
ITEM STANDARD
C. High term 540 colour
NV /SOLID CONTENT 42+/- 2
one component physically drying silicone acrylic coating. It is an
FLAST POINT 26 C
aluminium pigmented product. It is heat resistant up to 600 °C. Can be
GLOSSYNESS MATT
used as primer, mid coat or finish coat in atmospheric environments.
DENSITY 1,3
Suitable for properly prepared carbon steel, galvanised steel, stainless
VOC 520
steel and aluminium substrates. SUBTRATE TEM 5
DRYING TIME 10 23 40 ‘C
Colours PERATURE
aluminium SURFACE DRY 60 45 30 15 MINUTE
DRY ON WALK 4 3 2 1,5 HOUR
Protective: Dry to over coat, 8 5 4 3 HOUR
Designed as a heat resistant coating. Suitable for insulated and non minimum
insulated surfaces. Recommended in
combination with an inorganic zinc silicate coating as primer, providing DRY FILM THICKNESS 20 -30UM
heat resistance up to 400 °C and long WET FILM THICKNESS 50-70 UM
term corrosion protection. For shorter periods, such a combined Theoretical spreading 20-14 M2/L
system can handle peak temperatures up to rate
540 °C
PRODUCT DEVELOPMENT PLANNING.
D.High thermal/high temperature coatings
Top coat
ITEM STANDARD
D. High term 650
NV /SOLID CONTENT 76+/- 2
a one component inert multipolymeric matrix coating. It is resistant to
low temperatures, down to -196 FLAST POINT 18 C
°C and high temperatures, up to 650 °C continuously, 720 °C GLOSSYNESS MATT
intermittent. Can be used as primer or finish coat DENSITY 1,92
in atmospheric environments. Suitable for properly prepared carbon
steel and stainless steel substrates. It can VOC 464
DRYING TIME SUBTRATE TEM 10 15 23 40 100 ‘C
be applied on hot substrates up to 400 °C. PERATURE
Colours SURFACE DRY 600 360 120 120 30 MINUTE
grey, aluminium effect DRY ON WALK 24 24 6 4 1 HOUR
Typical use Dry to over 24 24 6 4 1 HOUR
Protective: coat, minimum
Specially designed for preventing corrosion under insulation (CUI).
Recommended at dry operating surface DRY FILM 100 -150UM
temperatures that can range from cryogenic, i.e. -196 °C, to above THICKNESS
650 °C (intermittent 720 °C). Suitable for insulated and non insulated WET FILM 135-200 UM
surfaces. THICKNESS
Theoretical spreading 7,6-5,1 M2/L
rate
PRODUCT DEVELOPMENT PLANNING.
D.High thermal/high temperature coatings
Top coat
ITEM STANDARD
E. High term 1000 ceramic coat
NV /SOLID CONTENT 75+/- 2
two component titanium catalyzed inorganic ceramic copolymer. It
complies to the generic type Multi FLAST POINT 26 C
Polymeric Matrix Coating. It is resistant to low temperatures down to - GLOSSYNESS MATT
196 °C and high temperatures up to 1000 DENSITY 1,8
°C continuously, where substrates allow. Can be used as primer or
finish coat in atmospheric environments. VOC 362
DRYING TIME SUBTRATE TEM 10 15 23 40 ‘C
Suitable for properly prepared carbon steel, stainless steel and PERATURE
ceramic substrates. On carbon steel and stainless SURFACE DRY 5,5 3 2,5 1,5 HOUR
steel substrates it can be used up to 650 °C continuously and 750 °C DRY ON WALK 24 18 6 3,5 HOUR
intermittent. It can be applied on hot Dry to over 24 18 6 3,5 HOUR
substrates up to 150 °C. coat, minimum
Typical use Dried cured for
service
Protective: DRY FILM 100 -150UM
Designed as a heat resistant coating. Suitable for insulated and non THICKNESS
insulated surfaces. Can be used in WET FILM 130-200 UM
combination with an inorganic zinc silicate coating as primer, providing
THICKNESS
heat resistance up to 400 °C and long Theoretical spreading 7,5-5 M2/L
corrosion protection. For shorter periods, such a combined system can
rate
handle peak temperatures up to 540 °C
PRODUCT DEVELOPMENT PLANNING.
D.High thermal/high temperature coatings
PRIMER