Professional Documents
Culture Documents
Rushi (ITR)
Rushi (ITR)
Rushi (ITR)
Seminar On
Industrial Training
Presented By
Dahale Rushikesh
Guided By
PROF. AROTE.P.J
HOD Principal
(Electrical engineering) (Samarth polytechnic,Belhe)
Prof.Sonawane G.L. Prof.Kapile A.S.
TABLE OF CONTENTS
INTRODUCTION
ABOUT THE TRAINING
CERTIFICATE
WHAT I HAVE LEARNED
CONCLUSION
INTRODUCTION
▸
Introduction Of Store.
Knowledge About Electrical Equipment.
Maintenance Of Electrical Appliances And
Equipment.
Repairing Electrical Equipment.
Using And Maintaining Hand And Power Tools,
Such As Screwdrivers, Pliers And Drills.
Install Wiring, Lighting Systems.
MAINTENANCE OF ELECTRICAL
APPLIANCES AND EQUIPMENT
Always Make Sure The Electric Power And/Or The Gas Supply To The Appliance Is
Disconnected Before You Test The Appliance To Diagnose The Problem Or Make Any
Repairs. If You Turn The Power On To Check Your Work After Making A Repair, Do
Not Touch The Appliance; Just Turn The Power On And Observe. If Adjustments Are
Needed, Turn The Power Off Before You Make Them.
If The Parts Of An Appliance Are Held Together With Screws, Bolts, Plugs, And Other
Take-apart Fasteners, You Can Probably Make Any Necessary Repairs. If The Parts Are
Held Together With Rivets Or Welds, Don't Try To Repair The Appliance Yourself. Call
A Professional Service Person.
In Most Cases, Broken Or Malfunctioning Appliance Parts Can Be Replaced More
Quickly And Inexpensively Than They Can Be Repaired By You Or A Professional.
Replace Any Broken Or Malfunctioning Parts With New Parts Made Especially For
That Appliance. If You Cannot Find An Exact Replacement For The Broken Part, It's
Okay To Substitute A Similar Part As Long As It Fits Into The Old Space. In This Case,
Refer To The Manufacturer's Instructions For Installation.
INSTALL WIRING, LIGHTING SYSTEMS