Professional Documents
Culture Documents
LAB 12 Biochemical Tests 2 2nd 2020-2021
LAB 12 Biochemical Tests 2 2nd 2020-2021
Lab-12
Bacterial Identification
Biochemical Tests: Part-II
Second Semester 2020-2021
1
Triple Sugar Iron Agar (TSI):
This test is used to differentiate between certain bacterial species on the basis of differences in their:
1- Sugar fermentation
2- Gas Production and
3- H2S production
TSI agar is orange-red in color, which reflects the color of the included
pH indicator at neutral pH.
Note: after being prepared, TSI is poured into glass tubes. After
sterilization of the tubes by autoclaving, the tubes are allowed to cool
and solidify at a slanted angle. So, the tubes of the prepared TSI agar
appear as shown in image.
TSI agar contains:
Lactose, Sucrose and Glucose sugars with 1% concentrations for both Lactose and Sucrose
and 0.1% concentration for Glucose.
Phenol Red: it is a pH indicator that serves to detect fermentation of one or more of the sugars
included in the TSI agar. If the bacterium being tested ferments one or more of these sugars, the
color of this pH indicator turns from Red to Yellow (so does the color of the TSI agar) due to the
acid generated by the fermentation process.
Sodium Thiosulfate: If the bacterium being tested reduces this substance, H 2S is generated.
Ferrous sulfate: It is used for the detection of H2S by the bacterium being tested. The generated
H2S reacts with Ferrous Sulfate to produce a black precipitate (Ferrous Sulfide).
Peptone: it serves as a nutrient to support the growth of the bacterium being tested. Its aerobic
utilization by the tested bacterium produces basic (have alkaline pH) byproducts.
TSI test is mainly used to differentiate between
bacterial species that belong to family
Enterobacteriaceae , however it can be used for other
bacterial species that belong to other bacterial families.
2- Yellow Slant (A) and Yellow Butt (A) ((A/A)): this indicates that the
tested bacterium ferments Glucose, Sucrose or/and Lactose.
This results in the production of a large amount of acid which will change the
color of the pH indicator (Phenol Red) into yellow and so that generated A/A
alkaline products due to peptone metabolism (at the Slant part of the
medium), will not be able to neutralize the large amount of acid generated by
the fermentation process, so that the entire test medium (Slant and Butt),
becomes yellow.
K/K
3- Red Slant (K) and Red Butt (K) ((K/K)): this indicates that the
tested bacterium does not ferment any the three sugars found in the
medium.
Any bacterial species that is able to use Citrate as a sole source of Carbon has a transporter
(known as citrate permease) that internalizes Citrate from the surrounding environment into its
cytoplasm, where it can be utilized as a nutrient enabling the bacterium to replicate and grow.
In addition, Citrate agar contains inorganic ammonium salts (ammonium dihydrogen
phosphate), which can be utilized as a sole source of Nitrogen. When ammonium salts are used by
tested bacterium ,the ammonium salts breakdown into NH 3, which increases the pH of medium.
Alteration of the pH of the agar medium into an alkaline pH, converts the color of the pH indicator
( Bromthymol blue) into a blue color
Note: At a neutral pH, Bromthymol blue is green. At pH 7.5 or above, Bromthymol blue turns blue
7
Procedure:
The test bacterium is inoculated onto the slant of the agar test tube.
The inoculated tube in then incubated for 24h
After 24 h of incubation, if the inoculated medium turns blue, the bacterium is citrate positive.
If there is no color change, the color of the medium remains green, the bacterium is said to be
citrate negative
Note: the tested bacterium must be inoculated only onto the slant or the surface of the citrate agar,
because citrate utilization occurs only under aerobic conditions.
8
Urease Test:
This test is used to examine the production of urease enzyme by the tested bacterium. The production
of this enzyme can be utilized as one of the diagnostic features in the process of bacterial
identification (diagnosis).
The test medium (Urea Agar), contains urea and a pH indicator. Degradation of urea by the urease
enzyme generates ammonium, which has an alkaline pH .
This implies that, if the tested bacterium produces the enzyme urease, by the end of the incubation
period, the generated ammonium converts the pH of the medium into Alkaline, which in turns
changes the color of the pH indicator from yellow to fuchsia (pink).
Procedure:
The test bacterium is inoculated into Urea Agar and then incubated for about 24h at 37 ºC.
The change in the color of the medium into fuchsia (pink), implies that the tested bacterium
produces urease enzyme.
9
SIM Test:
SIM medium is used to examine three features of the tested- bacteria, which can be used in the
identification process (diagnosis).
Procedure:
10
By the end of the incubation period:
1- Motility (M):
In case that the tested bacterium is non-motile, only a line of growth is seen along the stabbing line (as
seen in B of the image given below).
In case that he tested bacterium is motile, there will be a line of growth a long to the stabbing line
surrounded by a turbid or a hazy region, indicating that the tested bacterium is spreading through the
medium by virtue of its motility (as seen in C of the image given below).
2- H2S production:
11
3- Detection of Indole:
Some bacterial species produce the enzyme Tryptophanase, which hydrolyzes the amino acid
Tryptophan into Indole, Pyruvic acid, and Ammonia.
It is possible to know that the bacterium being tested has this enzyme by detecting the presence of
Indole in the medium (recall that SIM medium contains a large amount of Tryptophan)..
Indole can be detected by the addition of about 0.5 ml of a colorless solution known as Kovac’s
Reagent. This reagent contains a substance that reacts with Indole to generate a product that is
Red/Fuchsia in color.
In case that the tested bacterium generates Indole (Indole positive/has Tryptophanase), the added
Kovac’s Reagent becomes Red/Fuchsia in color within few minutes (as seen in C of the image
given in the next slide).
In case that the tested bacterium does not generate Indole (Indole negative/does not have
Tryptophanase), the added Kovac’s Reagent remains colorless (as seen in B and D of the image
given in the next slide)
The presence or absence of this enzyme is one of the features that can be used in bacterial
identification.
Note: Kovac’s reagent contains
Hydrochloric acid, p-
dimethylaminobenzaldehyde (DMABA),
and n-Amyl alcohol. DMABA reacts
with Indole to generate a Red to
Fuchsia- colored Quinoidal compound.
12
A Follow Chart Based on Culture Characteristics & Biochemical testing
Commercial Panel Tests API system
Points 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4
Commercial Panel Tests API system
Commercial Panel Tests API system
Commercial Panel Tests API system
Commercial Panel Tests API system
Find the 7 digital Code for this results
Chromogenic Technology
19