Professional Documents
Culture Documents
Analog To Digital Conversion
Analog To Digital Conversion
+ Control
V2
- Unit
(Counter)
Clock
End of
Conversion
DAC Register
V1
Analog to Digital
Conversion
Start Command pulse initiate the operation
Clock determine the rate
Register output bits converted to analog by DAC
DAC output compared with analog input
If V2>V1 comparator output says “high”
Then continue the operation
If V2<V1 comparator output says “low”
Then stops the conversion
End of conversion activates
Conversion Errors
For example V1=7v & V2=6.5=v
Comparator output is low
Final digital output will be 7v
But it is not an actual value
How to reduce this?
Increasing DAC input bits(reducing Resolution)