Professional Documents
Culture Documents
ENDC Presentation
ENDC Presentation
SESSION
Stand-alone(SA) vs NSA (no SA)
2
3X NSA EN-DC
EnodebNR-DualConnectivity
5G CORE LTE CORE
5GC EPC
SRB DRB
5G LTE 5G
gNB DRB eNB gNB
SRB
UE DRB
UE
Multi-CONNECTIVITY
ENDC Carrier Aggregation(CoMP)
L1 L1
L1 L1
5G
LTE LTE
gNB LTE
eNB eNB
UE eNB
UE
It allows 2 nodes from different
technologies or RAT(NR/Wifi) to Only on same technology, but
be connected it is faster (-Latency)
APPLICATION CASE
ENDC should be done with ALL NR Integrations i.e. NR600, N41
LTE NR
eNB ENDC Creation gNB ENDC Creation
PmFlexCounter
3.Check Radios
hget field data|state Check we have the proper radios and all enabled
4. Check that Endpoint on NR exists, if not, raise ticket with TCM
get LocalIpEndpoint=1
st amf
*If AMFs are not up, check if you can ping the router:
get Transport=1,Router=vr_TRAFFIC,RouteTableIPv4Static=1,Dst=1,NextHop=1 address > $TRAFFICIP
mcc Transport=1,Router=vr_TRAFFIC ping $TRAFFICIP
***If after restart they don’t come up, ask FE to call Switch
NR st term
3 MOS:
GNBCUCPFunction=1,TermPointToGNBDU=1
GNBDUFunction=1,TermPointToGNBCUCP=1
Termpoint to ENB Legacy
NR get . ssbFrequencyAutoSelected
8.3 Check the
frequency selected
by NR cells and that
these are created on
LTE Legacy
pr NRCellRelation=
LTE pr GutranFreqRelation NR pr NRFreqRelation
This
frequency
must be All cells
created for all related
cells** between them
NOTE:
N41 doesn’t
relations with Relation
L600/700 created for
the given
band
11. The Final Check is done during CT
NRCC GUIDE
KNOWLEDGE SHARING ENDC