Professional Documents
Culture Documents
Well Come To My Presentation
Well Come To My Presentation
PRESENTATION
APRIL 4, 2021
WSU, ETHIOPIA
WOLAITA SODO UNIVERSITY COLEGUE OF
ENGINEERING DEPARTMENT OF MECHANICAL Project
ENGINEERING Engine holding
and lifting
device
HOSTING COMPANY ETHIOPIAN ROADS AUTHORITY
NAME ID
TARIKU TAMIRU ENG/R/0888/09
PART ONE
INTERNSHIP REPORT
ERA is one of the organizations under the
Ministry of Works and Urban
Development and accountable to the
Board, is responsible for planning and
formulating long and short-term plans
and programs for road construction,
design, maintenance of trunk and major
link roads, as well as for administration
of contracts.
1.2 VISION OF ECWC
“To take the leading position in Africa and to be globally competitive construction
company”
GENERAL OBJECTIVE
Ø To design engine holding and lifting device.
SPECIFIC OBJECTIVE
Ø The objective of this work is to design a device that is reliable; efficient cost effective and
safe in order to minimize and eliminate the risks involved during engine maintenance.
Ø To make easy and flexible working condition.
Ø To increase our ability on the machine design to solving the problem
Ø To save time
Ø To design parts of engine holding and lifting device
METHODOLOGY
Description of the Proposed Model
The proposed design is made up of several separate components put together to form a linked
mechanism.
It has a support plate on which the Engine will rest.
There are also the links, joined together by pins to the brackets.
This mechanism makes the up and down movement of the support plate possible when the power
screw connecting the two brackets is turned either clockwise or counterclockwise.
The device also has a base in the form of a board with wheels to make easy the drawing and pushing
of the device with the Engine on it.
. A motor is used to turn the power screw by means of a gear.
There are two gears with different size. The larger gear is mounted on the power screw and the
smaller gear is attached with the shaft of motor.
The two spur gears are mesh together in such a way that the smaller gear drive by motor is used to
drive the larger gear mounted on the power screw the gear mechanism which is included in our
design used for speed Reduction purpose.
PRINCIPLE OF OPERATION OF THE PROPOSED DESIGN
This design operates on the same principle on which a bolt and a nut operates in that when a bolt rotates in
a nut, it changes rotational angular motion to linear motion to transmit power or to develop large forces. In
this design, only one of the two brackets has its hole threaded. The other one has a smoothed hole. The
portion of the power screw that is through this hole is also smoothened to facilitate its rotational
movement in the hole. During operation, the operator presses the start button to start the motor which has
a gear that is in mesh with another gear mounted on the power screw.