Rope elevators use a traction machine and counterweights to efficiently move elevator cars up and down. The traction machine and controller are typically housed in a machine room on the roof. Belt manlifts are simpler devices that move passengers between floors using a belt with steps rather than an enclosed elevator car. The procedure for rescuing trapped elevator passengers involves turning off power to the elevator, communicating with passengers, unlocking and opening the landing door if safe to do so, and having trained lift technicians manually bring the elevator to the nearest level landing. Emergency landing devices can also be used to prevent passengers from becoming trapped during power failures.
Rope elevators use a traction machine and counterweights to efficiently move elevator cars up and down. The traction machine and controller are typically housed in a machine room on the roof. Belt manlifts are simpler devices that move passengers between floors using a belt with steps rather than an enclosed elevator car. The procedure for rescuing trapped elevator passengers involves turning off power to the elevator, communicating with passengers, unlocking and opening the landing door if safe to do so, and having trained lift technicians manually bring the elevator to the nearest level landing. Emergency landing devices can also be used to prevent passengers from becoming trapped during power failures.
Rope elevators use a traction machine and counterweights to efficiently move elevator cars up and down. The traction machine and controller are typically housed in a machine room on the roof. Belt manlifts are simpler devices that move passengers between floors using a belt with steps rather than an enclosed elevator car. The procedure for rescuing trapped elevator passengers involves turning off power to the elevator, communicating with passengers, unlocking and opening the landing door if safe to do so, and having trained lift technicians manually bring the elevator to the nearest level landing. Emergency landing devices can also be used to prevent passengers from becoming trapped during power failures.
elevators efficiently moved up and down by an electric traction machine that uses a wire rope balancing the car against counterweights. The most widely-distributed type are the rope elevators with a traction machine and a controller housed in the machine room on the rooftop belt manlift or manlift is a device for moving passengers between floors of a building. It is a simple belt with steps or platforms and handholds rather than an elevator with cars. Its design is similar to that of a paternoster lift. PROCEDURE ON HOW TO SAVE ELEVATOR MANTRAP The authorized people should communicate with the person or people who are trapped inside the lift car. Find out how many people are inside and instruct them to remain calm and stay away from the car door.2. Turn off the electric supply at the main switchboard in the machine room to the elevator where people are trapped inside. In this case, lift No. 2 is the lift that has broken down. Turn off the isolator/switchboard for lift No. 2 only.Talk to the passengers.Turn off lift . Unlock doors. 3. Proceed with the rescue operation by opening the landing door with the landing door key at the floor where the elevator has stopped. 4. If the elevator car is located at a level of more than ± 600mm to the nearest landing floor, do not release the passengers. If the elevator car is not level to safely bring the passengers out then sometimes it is advised to open the door approximately only about 200mm to allow fresh air or light into lift car to make the passengers feel more comfortable while waiting for the lift technicians to arrive. Release brake.Rescue works should be carried out by lift technicians as there is the danger that such rescue works may result in the risk of a fatal accident of the trapped passengers falling back into the lift shaft.The lift technicians are trained to manually bring the lift to the nearest landing floor level by slowly releasing the elevator emergency landing device is useful for preventing passengers from becoming trapped inside an elevator during a power failure.