Professional Documents
Culture Documents
Group 4
Group 4
Group 4
ROBOTICS
Group 4
COMPILATION OF ARDUINO UNO PROJECTS
★ Christian B. Francia Kaira Domingo Glenilyn Manugid Christine Calumpag Christian Dy Tioco
22/10/2021
Project 1
A. Automatic Faucet (Touchless)
Project 1 A. Automatic Faucet (Touchless)
Functions/Features
The water flow will be stopped when the faucet is not in use or during
soaping, and this saves water. You do not have to touch the surface of the
faucet after you wash your hands; you can wash your hands safely and
prevent coronavirus disease. The tube is led out of the plastic container and
acts as a faucet.
They made this project with limited resources. They had to use the
submersible water pump to demonstrate my project. This project is effective,
easy and only costs around $10 to build.
Project 1 C. Automatic Faucet (Touchless)
Circuit Diagram
Arduino UNO - is a low-cost, flexible, and easy-to-use
programmable open-source microcontroller board that
can be integrated into a variety of electronic projects.
Insight
We like the water flow will be stopped when the faucet is not in use or during
soaping, and this saves water all the functions are on point very useful to
students or people and I like the most is you can reuse plastic containers and
convert them into touchless faucets. This prototype is portable and can be
used anywhere. They can be powered using rechargeable Li ion batteries and
the batteries can be charged with solar panels overall the project is perfect.
Project 2
A. Measure Heart Rate and SpO2 with MAX30102
Project 2 A. Measure Heart Rate and SpO2 with MAX30102
Functions/Features
Measure Heart Rate and SpO2 with MAX30102 project is very useful and
essential for everyone's health. It can detect and measure a person's pulse
rate, which is very interesting and useful. The Project is in progress. Once
you've placed your finger, stay quiet for a few moments until you hear the
Buzzer's "Beeps" synchronized with your heartbeats or the OLED animation
is synchronized with it, at which point you'll be able to read a correct BPM.
Project 2 C. Measure Heart Rate and SpO2 with MAX30102
Circuit Diagram
Arduino UNO - is a low-cost, flexible, and easy-to-use
programmable open-source microcontroller board that
can be integrated into a variety of electronic projects.
Insight
Based on the group's insights on the project According to the opinions and ideas of
those who have tried the project, it has a great performance when some other people
apply it to their own selves.
The concept is quite beneficial because all you have to do is place your finger on a
sensor to determine how high or low your heart rate is, which is both interesting and
simple to use.
Even if some other individuals who attempted this project ran into issues, the
developer is quite responsive and responds to comments quickly to address the
problem and complaints. And, in terms of the group's suggestions for improving the
project's performance, the project's performance can be much improved if the project
uses the board first for a better outcome because it can consume a lot of memory
space. The group simply recommended that the project improve because it appears
that it is performing well.
Project 3
A. Alcohol Tester With LED lights made with Zerynth
Project 3 A. Alcohol Tester With LED lights made with Zerynth
Functions/Features
In this work, we show how to use Zerynth to build a tester for determining
blood alcohol level from some kind of breath sample.
We used an Arduino Due, but also because Zerynth is multiboard, it is
feasible to utilize other ARM boards such as the Particle Core, Photon, and
ST Nucleo using the same code.
Our breathalyzer features nine LEDs, three of which are green and six of
which are red. They turn on and off depending on the amount of alcohol
detected by the MQ-3 sensor. The system must be calibrated by using the
resistors and setting the values of the calibration array in the code. Otherwise,
a potentiometer can be used. When the concentration is below a certain level,
the goal is to have only the three green LED lights on.
Project 3 C. Alcohol Tester With LED lights made with Zerynth
Circuit Diagram
Arduino due Arduino Due has a number of facilities for
communicating with a computer, another Arduino or
other microcontrollers.
Resistor 220 ohm - Resistors act to reduce Resistor 10k ohm - a 10K Ohm resistor, you would
current flow, and, at the same time, act to have 6/10,000 amperes of current flowing in the circuit.
lower voltage levels within circuits.
Project 3 D. Alcohol Tester With LED lights made with Zerynth
Insight
Based on the most recent people who have tried the alcohol tester, it performs
well when applied to other people, allowing you to determine if they're not
drunk. The concept is appealing since all you have to do is breathe for the
sensor to detect how much alcohol is present in your body, which is both
exciting and simple to use. Even when the other people who use the alcohol
tester have no problems, if they do, the developer is quite attentive and can
respond immediately to fix the problem and concerns.
E. MEMBER’S CONTRIBUTION