Professional Documents
Culture Documents
1 - 数据记录仪Data logger operation Maual
1 - 数据记录仪Data logger operation Maual
1 - 数据记录仪Data logger operation Maual
1
Contents
2
I 、 Installing the Telemotive System Client
Step3. please Copy the client to your computer,Recomend copy to D disc. and then double click the client and
setup,as follows:
Step2. After successful installation you will find the Telemotive System Client icon ou your desktop,Double-click
the icon to start the application,as follows:
Step3. The item [Help] offers access to the links to the main manuals,as follows:
3
II 、 Hook up Data logger and connecting cables
1. The data logger kit contains five sub-components : data logger, the communication cables,DC-DC Converter,OBD Cables
and Ethernet cable, as follows:
4.1 OBD Cables-two terminals 4.2 OBD Cable-three terminals 5.Ethernet Cable
Note: There are 2 types of OBD cables (4.1 and 4.2), anyone can be used in conjunction with the communication cables.
4
II 、 Hook up Data logger and connecting cables
2. Hook up the Data logger
Step 1: Connect the data logger with the communication cables. and push the locking plate to lock the communication interface.
5
II 、 Hook up Data logger and connecting cables
2. Hook up the Data logger
Step 2: Connect DC-DC converter with the communication cables.
Connecting method:
1) HSCAN1(the communication cables) and interface 1(OBD cables);
2) HSCAN2(the communication cables) and interface 2(OBD cables).
7
II 、 Hook up Data logger and connecting cables
2. Hook up the Data logger
Step 3.2: Connect the communication cables with OBD cables. If OBD cables have three communication interface,the connecting
method is as follows:
Connecting method:
1) HSCAN1(the communication cables) and interface 1(OBD cables);
2) HSCAN2(the communication cables) and interface 3(OBD cables).
8
II 、 Hook up Data logger and connecting cables
2. Hook up the Data logger
Step 4: Connect DC-DC converter with OBD cables.
9
III 、 Data logger opeartion manual
1. After the vehicle high-voltage system is powered on, Connect the OBD interface of OBD cables with the OBD Interface on
the vehicle dashboard.
10
III 、 Data logger opeartion manual
2. Connect the Gigabit port ETH#1 with the Ethernet Port of your computer by a Ethernet cable.
11
III 、 Data logger opeartion manual
3. Power on/off the data logger
Switch on the device by pressing the [On/Trigger] button and wait until the logger is ready.
For switching off the device please press [on ]button for about 5 seconds till the [action] LED starts pulsing.
12
III 、 Data logger opeartion manual
4. Double-click the Telemotive System Client icon ou your desktop,and then start the application,as follows:
13
III 、 Data logger opeartion manual
5. Set IP address
Click + Enter IP address, select IP:192.168.0.233, and then the display interface on the right appears , as follows:
14
III 、 Data logger opeartion manual
6. Click icon, Start configuration interface , as follows:
15
III 、 Data logger opeartion manual
7. Update date and time
Click , and click "set date and time on logger", and then "Logger time was updated successfully" appears in
the lower right corner of the display interfaceas,as follows:
Note: If this date and time are inconsistent with your computer's time, the device will not function properly.
16
III 、 Data logger opeartion manual
8. Configuration Baudrate of HSCAN-1 and HSCAN-2
Click , and select "CAN-HS #1(HSCAN-1)", and then select items according with steps 2,step 3 and step 4.Finally click
"write to logger" and complete the configuration, as follows: Note: Baudrate:select 250,000 bits/s
2
1
17
III 、 Data logger opeartion manual
8. Configuration Baudrate of HSCAN-1 and HSCAN-2
Select "CAN-HS #2(HSCAN-2)", and then select items according with steps 2,step 3 and step 4.Finally click "write to logger" and
complete the configuration, as follows: Note: Baudrate:select 250,000 bits/s
2
1
3
18
III 、 Data logger opeartion manual
9.Tools setting
Step1: Click"Tools", Select "setting", and then select items as follows.Finally click "OK" and complete the configuration.
19
III 、 Data logger opeartion manual
9.Tools setting
Step2: Select "setting", and then select items as follows.Finally click "OK" and complete the configuration.
20
III 、 Data logger opeartion manual
10.Online monitor
Click icon , Select , Note that the arrow on the left shows green, indicating normal communication.you can see
the message inside the red frame.
21
III 、 Data logger opeartion manual
11.Data conversion
Click icon , Select the data that you need to convert (Date and time,Section) , Note that the arrow on the left shows green,
indicating the data can be normally converted.
4
one, and appears as follows.
2
1
22
III 、 Data logger opeartion manual
11.Copy the Data and send to Foton bus
Find out the target directory, Select and copy the data that you will send to Foton bus, as follows. ( Files name : *.blf )
23