Insulation was added to the caustic line to maintain average temperatures of 95 degrees in the caustic boiler and 85 degrees in the mixer. Equipment upgrades and repairs were performed including installing a temperature probe in the dryer bed, replacing old air compressors with more efficient models, changing the packaging separator mesh from metal to wood to prevent breaks, adding covers to hulling screw conveyors for cleaning and production, and changing screw conveyor bearings to a Teflon design for smoother operation. Maintenance was also performed on the effluent treatment plant overhead reactor tank.
Insulation was added to the caustic line to maintain average temperatures of 95 degrees in the caustic boiler and 85 degrees in the mixer. Equipment upgrades and repairs were performed including installing a temperature probe in the dryer bed, replacing old air compressors with more efficient models, changing the packaging separator mesh from metal to wood to prevent breaks, adding covers to hulling screw conveyors for cleaning and production, and changing screw conveyor bearings to a Teflon design for smoother operation. Maintenance was also performed on the effluent treatment plant overhead reactor tank.
Insulation was added to the caustic line to maintain average temperatures of 95 degrees in the caustic boiler and 85 degrees in the mixer. Equipment upgrades and repairs were performed including installing a temperature probe in the dryer bed, replacing old air compressors with more efficient models, changing the packaging separator mesh from metal to wood to prevent breaks, adding covers to hulling screw conveyors for cleaning and production, and changing screw conveyor bearings to a Teflon design for smoother operation. Maintenance was also performed on the effluent treatment plant overhead reactor tank.
Insulation was added to the caustic line to maintain average temperatures of 95 degrees in the caustic boiler and 85 degrees in the mixer. Equipment upgrades and repairs were performed including installing a temperature probe in the dryer bed, replacing old air compressors with more efficient models, changing the packaging separator mesh from metal to wood to prevent breaks, adding covers to hulling screw conveyors for cleaning and production, and changing screw conveyor bearings to a Teflon design for smoother operation. Maintenance was also performed on the effluent treatment plant overhead reactor tank.
Construction of working platform on hulling feeding elevator Installation of temperature probe on the upper part of the of the dryer bed to know/observe the temperature above the seed. In-house changing of two old 18.5kw,106CFM, ingressor rand air compressors to two 30kw, 192 cfm air compressor ,all done in-house saved around N900,000 installation and commissioning cost. Metal plate mesh for final/packaging separator was changed to wooden mesh to forestall occurrence of broken meshes and balls finding there way into the line. 4 hulling screw conveyors provided with hinged covers, to avoid 1)misplacing of particularly assigned covers 2)easy opening and closing for washing purpose while production is ongoing 3)avoid particles falling into the conveyed material Changed bearing type screw conveyor hanger to Teflon design for smoother operation between conveyor shafts. ETP OVERHEAD REACTOR TANK REPAIR AND MAINTENANCE