Professional Documents
Culture Documents
PA Inspection Guidelines For Single Site Acceptance: 1 © Nokia Siemens Networks
PA Inspection Guidelines For Single Site Acceptance: 1 © Nokia Siemens Networks
Page 1 PA Certificate
Page 1 will be filled by DCC team, just leave it
Sites in this Polygon please refer to the latest SDB. When the sites not on air yet just leave it blank.
For internal use only! Nokia Siemens Networks
When generating prediction, the ranges & colors must set to PA default ranges
Please be concerned on comparison : All ranges must be as same as it used on covplot , so it comparable. All ranges must be shown on legend even when no data on it. Also show Site ID & Site Name
For internal use only! Nokia Siemens Networks
Drive test result must as closed as possible to the prediction Check also the logfile in tems, make sure the partner not cheating Use Tems Route Analysis to check binning validity
All ranges must be shown on legend even when no data on it. Also show Site ID & Site Name
For internal use only! Nokia Siemens Networks
These are default ranges & colors for RxQuality Plot All ranges must be shown on legend even when no data on it. Also show Site ID & Site Name
For internal use only! Nokia Siemens Networks
These are default ranges & colors for SQI Plot All ranges must be shown on legend even when no data on it. Also show Site ID & Site Name
For internal use only! Nokia Siemens Networks
For SQI ;
For samples contain only Full Rate (EFR/AMRFR), KPI to reach is >=28,80% For samples contain only Half Rate (HR/AMRHR), KPI to reach is >=20,80%
For internal use only! Nokia Siemens Networks