Professional Documents
Culture Documents
Week 5 How To Draw An Assembly Drawing of A Couple of Spur Bevel Gear
Week 5 How To Draw An Assembly Drawing of A Couple of Spur Bevel Gear
200
1 = 2 00
X1= X2 0
Accuracy grade 9
Step 1: Draw 2 crossed center lines with angle of 900 m 3
The angle between 2 crossed center lines = 1 + 2 = 90o , hence:
N1 27
N2 68
200
1 = 2 00
X1 = X 2 0
Accuracy 8
grade
Z1 Z2
Step 2: Calculate Pitch angle of 2 bevel gear2 1 arctg 2 arctg
Z2 Z1
Step 3: Draw pitch angle 1 and 2 of 2 bevel gears
Step 4: Calculate the cone distance of 2 bevel gears m
L Z 12 Z 22
Draw circle (0,L) that cut the pitch angle line at 3 points 2
M, N, P that definds the big end of 2 bevel gears
Step 5: From M, N, P draw a line that is perpendicular to the pitch
cone. On this line define the addendum and the dededum conic faces
Step 6: Connect apex A to addendum and dededum point to form a
tooth of bevel gear
Step 7: Select the width of bevel gear W~ L/3 and draw small circle
(A, L-W) that define the small end of the 2 bevel gears
Step 8: Draw big end, small end, addendum and dededum surfaces by basic thick width
lines
Step 9: Draw The holes, the keys and remainders of the couple of spur bevel gears
Caution: the clearance and the convention of drive and driven gear at engagement teeth
the clearance